What Are The 5 Golden Rules In Electricity?

Carrying out live work is a task that requires taking all the necessary precautions. Something that goes beyond having safety shoes and matching gloves. We have the proof in the five golden rules to carry out jobs with electrical risk, which will save you from more than one problem.

Among the different DIY and maintenance tasks that we carry out in our home, those related to electricity are the ones that can cause the greatest risks to our health. In fact, the electrical danger and the effects it can have on our physical integrity are considerable, since a shock can kill us or cause serious injuries in just a few seconds.


For this reason, those who work in this sector are always attentive both to occupational risks due to electricity and to the safety regulations for carrying out electrical work. However, those handymen who perform these tasks sporadically should also take into account the occupational risks of the electrician, since the dangers have been the same. To make it a little easier for you, we are going to know the five golden rules for electrical work, with which to avoid at a stroke a good part of the risks associated with live work.

Disconnect


Before starting to work on any element linked to a power line, it is essential to isolate all power sources that may be in tension on it. This avoids the electrical flow in the network on which we are going to work.

In addition, it is essential that, if this line has capacitors, batteries and other elements that can maintain a charge after isolation, they are discharged, using the corresponding tools. The idea is to eliminate any electrical flow in the circuit or line on which we are going to work to avoid any risk.

Prevent feedback


As important as disconnecting the current is to prevent it from being activated, either accidentally or on purpose. One of the solutions for this is to include in the electrical panel signage some notice that maintenance work is being carried out, so that no one touches what they should not. However, the best solution in this regard is to prevent anyone from touching these boxes , in order to avoid their activation. For this, padlocks can be used on the frame or blockers on the differentials in tension.

This same process must be carried out in the event that there are devices activated by remote control or other elements that may activate the system unexpectedly. As with the boxes, it is key to deactivate these elements until the job is done.

Check for voltage


When it comes to electricity, all precautions are little. Therefore, it is worth measuring the voltage of the circuit on which we are going to work before starting the task. To measure this voltage, we can use a multimeter or similar, which indicates the voltage present in it.

For this check, both the different elements such as the neutral and the rest of the active components of the system must be verified. If during the measurement it is found that any of these elements maintain voltage, it will be necessary to verify the connections of the same, to close that flow of energy before carrying out any work.

Isolate to ground and short circuit


You have to prevent everything from failing during work. For this reason, it is essential to ground the part of the installation where we are going to work. With this we will avoid that an unforeseen activation of the current can cause us a problem. The same applies to short-circuiting, to prevent additional risks during work.

In both cases, it is essential that these protections have a maximum resistance with respect to what the installation demands, be resistant so as not to loosen from their place and always be in sight of the operator, to control them visually. If not, these outlets should be as close as possible to the work area, for control purposes.

Delimit the work area


As a last measure, it is necessary to delimit the work area by means of cones, fences or similar elements. The idea is to prevent anyone outside the activity from touching something they shouldn’t. If necessary, it is also advisable to establish safe routes or steps , so that these people can move without risks for them.

And at home, what?


Everything that we have commented is applicable to work in tension and of a certain electrical intensity. But the truth is that taking precautions when doing domestic work is also vital. Issues such as disconnecting the main switch of electricity and verifying that there is no voltage in those elements on which we are going to work are never a bad idea. Again, the multimeter is your friend when it comes to checking that this installation has no voltage before working. The same happens with the locking mechanisms, to avoid accidental activations of the current.

Another interesting measure is to use protective elements , such as safety shoes or gloves suitable for electrical risks. The same happens with the tools to be used, which must have the necessary elements to protect you from these electrical risks.


As a last safety measure, do not forget to put everything back on correctly and to reactivate the earth protection measures that you may have disconnected during the work. And if, after finishing your task, you want to get more out of your diet, nothing better than resorting to the best brand Garcinia Cambogia you can find, to help you keep your weight under control.

Leave a Comment