Insulation Of The Walls Of A House

Properly insulated walls allow the interior temperature to be maintained while keeping street noise at bay. For this reason, it is good to know what is the best way to insulate the walls of the house, in order to enjoy an air-conditioned environment without spending too much money.

 

The energy consumption of the home depends to a large extent on the efficiency of the air conditioning system. In this sense, many families are currently opting for the so-called green energy to reduce the environmental impact and reduce the amount of the electricity bill. However, the installation of a solar panel system or any other type of ecological source involves a high initial investment, so it is essential to know how to insulate a wall to avoid heat loss, so that it is worth the expense.

 

We can say that in general lines thermal insulators for interior walls are easy to install, but it is also true that the level of difficulty can vary. In this opportunity, we will use as an example insulation with glass wool and plasterboard, very durable materials that do not cost too much money.

 

Tools and materials to insulate walls

To insulate walls from cold or heat we need glass wool rolls and their corresponding special adhesive, we must also have the plasterboard plates and the appropriate screws to fix them to the wall. Likewise, channels, galvanized sheet metal profiles , dowels, adhesive resilient tape, dowels and fixing clips are necessary. As for tools, it is good to have a drill driver, a tape measure, a pencil, a spirit level, a ruler, a cutter, a sheet metal scissors and a pencil on hand.

 

Structure assembly

It is important to take the measurements of the wall, taking the window frames as a reference, for this, we must use the ruler and the bubble level. Next, you have to mark a reference line for the installation of the channels on the floor and on the ceiling, for this we can use the pencil. It is possible to fix the ceiling and floor channels with dowels every 50 cm.

On the other hand, it is advisable to place a profile on the wall horizontally, either in the middle or at a height of 135 cm if the ceiling is very high. This profile should be fixed with a screw every 25 cm, so you have to use the drill and place plugs. As for the clips and dowels, they should be at 60 cm intervals.

 

Glass wool installation

The first thing we must do is cut the glass wool, so it is necessary to measure with the tape measure ( by clicking this link you can find some options to choose from ) from the floor to the ceiling and add 2 cm, so that the wool is well adjusted In addition, it must be nailed in the clips and fixing pins. Afterwards, it is necessary to place vertical profiles using the exact measurement from floor to ceiling, to hold them, you just have to adjust and lock each clip and dowel.

 

Placing the plasterboard

This is the last step and is usually the easiest, since it is only a matter of fastening the plasterboard to the wall. To achieve this, you only need special screws for this material and an electric screwdriver. The screws must be placed at intervals of 25 cm and always over the spaces where the vertical and horizontal profiles are.

 

Types of insulating materials for walls

In the current market there are different materials for thermal insulation of walls, and it is essential to know the properties of each one to know which is the most appropriate according to needs. Let’s look at some of the most popular ones.

  1. Glass wool

This is probably the best-known thermal wall insulation in the world. It is a mineral fiber made of sand, recycled glass and other elements that are heated to very high temperatures, to form fiberglass strands thinner than human hair. The end result is very similar to cotton. In general, wool is 50 mm thick, but there are different presentations. This fiber is covered with asphalt coated wood paper , which is efficient in isolating walls from moisture, thus preventing the appearance of mold.

  1. Polyurethane foam

This material has good thermal behavior and offers good insulation capacity with little thickness. Currently, the projected polyurethane foam , a mixture of polyol and isocyanate, is used by means of a machine for professional use. In this case, the application of the material must be done by a specialized company, but it is a good alternative to insulate walls without work.

On the other hand, it is also possible to find the spray foam in a bottle, which is ready to be used, is easy to apply and is free of isocyanate, so it is less toxic and can be used in closed spaces. Thanks to the ease of application, this type of insulation is widely used for ceilings. If you want to know how to isolate a wall from noise, this can also be a good option, since polyurethane foam has good acoustic resistance.

 

 

  1. Expanded and extruded polystyrene

Also known as white cork or polyexpan, this material is used in construction to prevent temperature from escaping through the walls. Expanded polystyrene is a spongy thermoplastic polymer, which despite being very resistant, is quite light, which allows to improve the insulation without adding weight to the structure. For its part, extruded polystyrene is much denser, so that it offers greater thermal and mechanical resistance , in addition, it resists moisture better, so it can be the answer if you wonder how to insulate an exterior wall. However, it is also true that due to the cost of the material, placing extruded polystyrene on the wall can be more expensive compared to installing polyexpan.

  1. Rock wool

It is a type of mineral wool made from volcanic rock, which not only allows the desired temperature to be maintained inside the home, but also has an A1 rating for its behavior against fire, thus delaying the spread in the event of fire. 

As we can see, there are different types of insulation for walls, that is why we must evaluate each material and take into account our particular needs to make the best decision when making the investment.

 

Leave a Comment