How To Saw With A Table Saw Tool

The best Table saw under 1000 requires great care in use, despite the guides and guards fitted to the machines.

It is mainly at the end of sawing that the risk is real.
Therefore, it is necessary to provide yourself with additional end-of-cut guides .

It allows you to push the piece of wood as close as possible to the blade without presenting your fingers.


It is also necessary to take the precaution of raising the shirt sleeves properly because of long sleeves.

Even buttoned ones can provide an unfortunate point of snagging with all the consequences that can ensue …

Our editors Choice's

Image

Item Name

Key Features

Price

  • 15.0A high torque motor 

  • Rack & Pinion Telescoping Fence System

  • 10" 24-tooth carbide blade

  • Have Heavy-duty steel

  • Have Self-aligning rip fence

  • EZ view measurement system

  • Constant Response circuitry

  • Constant Response circuitry

  • Large cast aluminum top

  • 24 tooth SERIES 30 saw blade

  • Powerful 1850 Watt motor 

  • Dust port reducer

  • Heavy Duty Fence Constructio

  • Powerful 15 Amp Contractor Grade motor

  • Professional Grade 5-Year

Features of the sawing station

Switch to saw position

  • On the machine, the sawing station is on the other side with respect two positions planning and planing.

  • To switch to the sawing position, release the work surface: remove the shaft and the router guide and position the router washer cover.

  • The guide used, the same as for the jointer, must be placed on its column.

  • The maximum width between the fence and the saw blade is 475 mm.

  • Move the selector handle: unlock it and put it in the “saw” position.

Changing the saw blade,

Change the saw blade. To change the saw blade (or check that someone correctly positioned it), operate the blade control lever near the selector and place it in the down position.

Remove the grid from the saw and remove the plate (nozzle) by removing the two fixing screws. Immobilize the tree using the spindle; loosen the hexagon head screw with the other hand using the special wrench.

Commonly used, very hard, tungsten carbide blades are suitable for all jobs.
Hard, they are also fragile and break if the piece of sawn wood includes a metal part (an old nail, for example).

I do their sharpening in a specialized workshop; do not sharpen them yourself.
There are special blades for chipboard and plywood.

Lock the cutting guide in position, at the desired dimension. The maximum projection above the table is 62 mm.

Lock the cutting guide in position at the desired dimension.

Behind the blade is the riving knife, which prevents contact with the rear teeth and jamming of the wood.

Do not push the piece of wood too hard: this will heat the engine.

Attention, sawing to the maximum thickness is done without protector . 

I do here the sawing at the maximum thickness: I have not therefore put the protector in place.

This is the only case where the saw is used without the guard: you must work with caution.

At the end of sawing, use a small block of wood to push the workpiece so that your fingers do not come close to the saw blade, which rotates at 5675 rpm.

They fix the protector to the riving knife using a clamping handle. The protector, which is used for all sawing work, comprises a cover fitted with wooden beams.

It prevents any contact of the hands with the blade and protects against projections of sawdust.

It is attached to the riving knife using a tightening handle (black handle).
At the end of sawing, push the wood with a small wedge to avoid any accidents.

The guide has a retractable index allowing the dimension to be read directly. The guide has a retractable index, which allows you to read the dimension directly.

For parts of small cross-section, an additional guide must be used; it attaches to the chief guide.

Thanks to its horizontal part, this additional guide makes it possible to see with the protector whereas the use of the primary guide would require placing the guide too close to the blade, preventing the fixing of the protector.

Always fix this slightly higher than the lumber.

Different cuts

Adjust the height of the blade to the desired height

Dig rebates

The circular saw allows you to cut rebates.
Adjust the height of the blade to the desired height by unlocking and maneuvering the device’s up and down handle.

Be careful at the end of sawing: the blade is not protected.

Use the mobile trolley with adjustable guide

Cut a series of parts of the same dimensions

To cut a series of parts of the same dimensions, use the mobile carriage, with orientable guide and screw presser.
The additional guide, attached to the chief guide, serves as a stop and facilitates the evacuation of falls.

Place the piece of wood against the guide of the carriage and immobilize it

Saw straight without using the primary guide

To saw straight without using the main fence, place the piece of wood against the carriage guide, parallel to the edge of the carriage.

Secure the workpiece using the screw clamp mounted on the guide.
To see at an angle with the carriage, place the fence in position.

Adjust the guide using a stopper they adjusted The guide with a stopper, which is fixed in a groove provided on the carriage.

Attach the carriage guide to the other side for larger parts. For larger parts, attach the carriage guide to the other side.
The screw presser used here is not essential.

Bias and bevel cut

Make the cut, on small parts, with the miter gauge it cut Small workpieces at an angle with the miter fence, which fits into a groove on the saw table.
This guide is indexable from 00 to 60 °, in both directions.

Move the piece of wood and the template together along the fence .one way to cut at an angle among several techniques.
If you are using the guide, first make a template to the desired dimension.

Then move the piece of wood and the template together along the fence, after placing the guard on the blade.

Table sawing requires great care in use, despite the guides and guards fitted to the machines.

It is mainly at the end of sawing that the risk is real.

Therefore, it is necessary to provide yourself with additional end-of-cut guides that allow you to push the piece of wood as close as possible to the blade without presenting your fingers.

It is also necessary to take the precaution of raising the shirt sleeves properly because of long sleeves.

Even buttoned ones can provide an unfortunate point of snagging with all the consequences that can ensue…

 

Features of the sawing station

  • On the machine, the sawing station is on the other side with respect two positions planning and planing.

  • To switch to the sawing position, release the work surface: remove the shaft and the router guide and position the router washer cover.

  • The guide used, the same as for the jointer, must be placed on its column.

  • The maximum width between the fence and the saw blade is 475 mm.

  • Move the selector handle: unlock it and put it in the “saw” position.

Leave a Comment