How To Paint Tiles?

Changing the color of your bathroom or kitchen walls has always caused some concern, as a large construction site was required in the past. However, today there is tile paint, which is a cheaper and easier way to improve the appearance of ceramic pieces.

Tiles are very useful in wall cladding, especially in predominantly humid areas of the house, such as the kitchen and bathroom. However, these are very delicate ceramic pieces, which over time can lose their shine and color. In addition, it is difficult to find exactly the same design to replace damaged tiles, so it is very common to have walls with different types of ceramic, which affects the aesthetics of the rooms. This is why we have compiled information on how to paint tiles, with the aim of obtaining a more homogeneous finish.

Step 1: Organize the space

Both in the bathroom and in the kitchen it is common to find elements, such as wooden coat racks, towel racks, lamps, adhesive hooks, among others; so it is important to remove everything before starting. On the other hand, it is necessary to put insulating tape on the cables, to avoid contact with electricity when painting. In addition, you must remove utensils, cleaning products and other objects that are near the walls. In this way, we avoid staining them with paint and at the same time we can have a more comfortable space to paint.

Step 2: Perform a Tile Condition Diagnostic

Due to being exposed to humidity, tiles are prone to the accumulation of fungi, bacteria and mold, especially in the joints, that is why we see more and more bathrooms and kitchens with painted tiles. However, it is good to diagnose the condition of the surface. In the case of the kitchen, there may be food residues, detergents, but especially accumulated fat. In this sense, it is good to check if the hood is fulfilling its function correctly, otherwise, a comparison of extractor hoods must be made to change it before painting.

As for the walls of the bathroom, it is possible to find dry remains of soap, shampoo and other products that we use frequently. Hence the importance of first thoroughly cleaning the walls, since tile paints must be applied on completely clean surfaces to improve adhesion capacity and increase durability.

Step 3: homogenize the surface

Everything you do to make the surface smooth and homogeneous will make the final result more professional. The remains of stickers and silicone must be removed with the spatula and the utility knife, while for cracks and imperfections you must use a plaster and let it dry. If you have painted kitchen tiles, it is preferable to sand before applying the new paint, especially if you want to change the color.

Step 4: clean the tiles

To clean the surface you may need cloths, degreaser, brush, water, among others. If the joints are very dirty, it is possible to make a paste with water and bicarbonate to apply and leave for a few minutes. Afterwards, you can proceed to pass the brush to remove the dirt, rinse with water and then dry well with a cloth. In case the tiles are clean, you just have to wipe a cloth dampened with a little degreaser before starting to paint.

Step 5: Protect the edges and trims

On the walls it is common to find trims and other elements that we cannot disassemble, so it is necessary to cover them with painter’s tape to avoid damaging them, since kitchen tile paint is difficult to remove once it has dried. In the same way, you have to protect the edges, the countertop and the floor, for this you can use recycling paper and adhesive tape.

Step 6: Prepare the paint

Preparation depends on the type of paint. In some cases, you have to use a thinner, while in others you just have to combine with water. In this sense, it is essential to read the product label very well. The thinner the paint, the more coats will need to be applied when painting colored tiles.

If it is epoxy paint, it is necessary to mix the resin with the catalyst. It is good to note that once the compound is created, it must be applied immediately, as it begins to harden after a few minutes.

Step 7: apply the paint

To paint kitchen tiles and obtain a better result, some experts recommend applying a layer of fixing primer, taking care to also cover the joints. Later, you can proceed to paint the tiles using the special paint.

It is possible to paint tile joints with a trowel and the rest with a roller, in this sense, professional painters recommend applying the paint from top to bottom, in order to avoid drops, marks and other imperfections.

Step 8: Let dry

The drying time between one coat and another is essential for a correct finish. Therefore, pay attention to the manufacturer’s recommendations. Likewise, it is important to mention that atmospheric conditions can influence the process, therefore, in cold climates, paints may take longer to dry, which is why many prefer to paint kitchen and bathroom racholas in summer.

Safety tips when painting tiles

We must point out that tile paints , even if they do not have very strong odors, can be harmful to health in very closed spaces, for this reason, it is necessary to open the windows and doors to have good ventilation during the process, in addition, this allows correct drying. Also, it is good to use protective glasses and an apron so as not to damage the clothing. Also, if you are going to use thinner and other strong products, it is advisable to use a mask and chemical resistant gloves.

Leave a Comment