How To Make A Table Lamp?

Making homemade lamps is a fun and easy task. You don’t have to be a DIY professional to create a table, ceiling or any other type of lamp. A job as entertaining as it is pleasant, with which to give a special touch to any room.

Light has a fundamental role in our home, both in the practical part and in the purely decorative part. In both cases, the wide variety of existing designs makes it easy to choose the look that best fits your approach. However, if you are a handyman, you may be struck by the idea of ​​creating your own lamp, according to your own preferences and the design that you like best.

Best of all, this process is much easier than it might sound, mainly due to the approach these products have. So if this DIY project catches your eye, don’t hesitate and make your lamp with the guidelines that we offer you below.

Parts of a table lamp

As with a kitchen recipe, when it comes to a table lamp it is necessary to know what it is that we are going to need for its construction. Something that we can easily solve if we know the parts of a table lamp.

The structure of the lamp consists of three main elements . The first of these would be the base of the lamp, which must be stable and allow it to rest correctly on the surface on which we are going to place it. The second is the electrical part, which consists of a cable, a lamp holder and a plug. You can also include a switch in the cable structure, although it is not required.

To finish off the design, the lamp includes a shade or similar, which covers the bulb and generates a more pleasant light, by diffusing it. However, this last element is no longer as essential as a few years ago, thanks to the design and finish of many bulbs. In fact, some already offer a soft and pleasant light by themselves, also having a design worth seeing.

How to make a homemade lamp?

Once we have the components that are part of the lamp, it is time to get down to work. If you notice, we have not talked about specific materials for the structure, since it can be created with almost anything . The most common is to use wood, because it is easy to work and adjust to the shape we want. But you can also resort to metal tubes or even glass bottles. The latter are drilled at low speed and are perfect for turning into lamps.

Regarding the electrical part, it is convenient that the cable is adapted to the space available inside the structure that we have built, also having an adequate length so that the lamp can be placed where you want. It is very important to always use a grounded cable , to minimize risks during the use of the product. It is also convenient to verify that the chosen lamp holder fits well into the structure and that it is the right size for the bulbs that we need to put in.

The most powerful bulbs require thick sockets, type E27, while the lighter ones use thin sockets or E14. By the way, to mount the lamp holder, it is enough to strip the cables, insert them into the corresponding sockets and tighten the screws correctly. Something similar happens with the plug connection, which follows the same principle. All you have to do is strip the wires, connect the terminals and close the plug.

Something more complicated is the process of placing the switch, although more because of the steps to be taken than because of its complexity. In fact, if we simplify it a bit, the placement of the switch is similar to the plug, only in this case it is only necessary to cut and strip one of the two power cables. We will leave the copper wires of that cable in sight and we will connect these to both sides of the activation plate, later closing the switch. Although, before doing so, it is convenient to verify that it moves correctly.

The final step would be to build the lampshade, in case we have not produced a finished finished product. Since this process is somewhat more complex, we have dedicated a specific section to it.

How to make a lampshade?

Although we have already briefly commented on the fashion of visible bulb lamps, the truth is that the most classic finish is given by the lampshades . These are used in both table and ceiling lamps, making it easy to coordinate their design with that of the rest of the room or doing the opposite, so that the lampshade draws attention.

Generally, this screen consists of two pieces, the frame and the cover. Racks can be purchased ready-made, simplifying the manufacturing process. However, you can also make them with wooden rods, taking the corresponding measurements and creating a solid structure that adequately resists use.

Regarding the screen itself, the part of the coating, here the options are triggered. The most classic solutions are fabric or paper screens , which offer multiple designs to choose from. You can also use rope screens, which are built by rolling the rope over the frame until it is completely covered. Something similar happens with macramé or crochet models, more laborious, but also very elegant and original, especially in bedrooms.

And once you have your lamp finished and placed on your table, you can dedicate yourself to other tasks, such as reading about what a thermoregulating mattress cover is, opinions about them and how it helps you sleep better.

Leave a Comment