Build Your Own Table To Place The Circular Saw

A table for the circular saw is an indispensable element in the workshop of every good carpenter and construction professional. This is because the table acts as a support for the wood and the different materials to be cut, provides stability and allows you to use both hands for greater safety. Consequently, this allows for more ambitious jobs, obtaining high-quality finishes.

Safety first

Building your own table to fix a circular saw ( you can find some options to buy in this link ) can be a challenge for those who are new to artisan carpentry, as well as for DIY enthusiasts, so we have compiled the information needed to start this project, as well as a step-by-step to successfully build a good, inexpensive saw table .

A point of great importance that should always be taken into account when working in carpentry is personal safety, since it is an activity that involves certain dangers, so it is worth taking into account some tips to prevent accidents. In this sense, it is necessary to follow the basic rules to work in an environment as safe as possible. 

In this sense, whoever handles the tools must have the basic knowledge for their use, otherwise, they must work under strict supervision of experienced personnel. In addition, the workplace should have good lighting and ventilation. Likewise, it must be neat to avoid tripping.

It is essential to use the appropriate safety accessories, such as a helmet, glasses, mask, hearing protection, gloves, comfortable clothing and metal-toed shoes to protect the toes.

Materials needed to start construction

To begin the process of building the saw table, it is important to be sure that all the tools and accessories are at hand, in this way you will avoid delays. Some materials needed to build this table are 4 1 ½-inch screws with wing nuts or slip nuts, 36 2-inch drywall screws, 32 1 ½-inch drywall screws, 32 1-inch drywall screws, and white carpenter’s glue.

The tools that we must have on hand to build the table are: tape measure, a center point, clamps or wood presses, screwdrivers and an electric or manual saw, which is appropriate for making cuts.

The accessories required for this project are rulers, squares, 4 swivel legs and a 50 cm long by 1 inch wide and ½ inch thick U-type aluminum profile. Also, it is necessary to have bits for drywall screws of 1, 1 ½ and 2 inches, as well as bits for 1 ½ inch screw of non-slip nuts.

The top, legs, slats and dowels used for the construction of this type of tables must be resistant and durable, which is why experts generally recommend the use of pine, cedar, oak or saman wood. However, chipboards are also suitable, such as MDF or Plywood,

It is important to note that although we will give you specific dimensions for this table, it is always possible that you change the measurements so that you can build one adapted to your needs. In this case, we will use 1 board of 80 x 50 x 1.5 cm, 4 slats of 60 x 8 x 1.5 cm, 4 slats of 27 x 8 x 1.5 cm, 4 square legs of 4 x 4 x 73 , 5 cm and 16 4 x 4 x 5.6 cm triangle shaped studs.

Step by step to build a circular saw table

Once you have the necessary tools, materials, woods and accessories, you can start with the construction. At the ends of the 4 slats of 60 cm and the 4 slats of 27 cm you must make bevel or 45º cuts. It is important that you make the cut on the side of the slats that is 1.5 cm thick, at the end they should be easily spliced ​​in their 4 corners.

Now is the time to assemble two structures as a frame, for which you must use 2 slats of 60 cm and 2 slats of 27 cm. Next, with the help of the clamps, make 3 holes to place the 2-inch drywall screws. It is important to apply glue to the joints to reinforce.

To join the 4 legs to the structure it is necessary to use the clamps again, in this case, they will hold the legs against the slats and allow to place 4 1 1/2 inch screws, two in each leg. At the end of the legs should be perpendicular and level with the edge.

When assembling the legs you must also place the triangular plugs, using at least one on each leg. To fix them you must use 4 1-inch screws, 2 on each side, indicated to give the table greater stability and resistance. A good idea to make these triangles is to use 8 cube-shaped dowels with dimensions of 4 x 4 x 4 cm, so that by dividing them diagonally you get 16 triangular dowels for best results.

For the next step, you must repeat the procedure carried out to join the legs, but in this case it will be to fix the lower part of them, for which it is necessary to place them at a distance of 20 cm from the ground. This second frame will give them more firmness, because it will prevent them from opening due to the weight you place on the table.

The next step is to open the respective holes in each corner of the base of the saw, for which you can help yourself by marking the drilling place with the center point, in this way, when setting the metal bit it does not slip or jump.

In the center of the board you must make perpendicular lines and cross them to facilitate the placement of the measurements of the base. Next, draw a rectangle with the dimensions of the metal base, using length x width.

Place the base of the saw on the board, then make the marks where the holes will go for the 4 screws that will hold it. Finally, properly center the board on the structure and apply glue on it and in the area of ​​the board, then fix the 12 2-inch screws, placing 3 on each side. In this way, you will have a strong and functional table.

Leave a Comment