Top 5 Best TIG Welders for Automotive Fabrication [ 2022 Updated ]

TIG welders allow you to perform solid and oxidation-free welds thanks to the inert gas environment where it is carried out, which avoids the presence of oxygen in it, improving results on any material and circumstance.

If you also bet on a model that has the necessary security to work without worries and with the power for the work you plan to carry out, surely your investment will be a success.

One of the most prominent models is the Tigmig TM 200 HF , as it has a high frequency welding function for more uniform, solid and long-lasting results. In addition, it can be used by beginners thanks to its intuitive interface.

On the other hand, the Moracle TIC 200A It features a 60% rated duty cycle at 200A welding current, offering good performance on steel, copper alloys, and titanium.

Buying Guide – What is the best TIG welder on the market?

Compared to traditional welders, the tig system, based on inert gases, allows to establish more resistant and stronger welds thanks to the gases that eliminate oxygen and prevent oxidation. Although the process is fundamentally industrial, modern equipment allows this type of welding to be carried out at home. So that you do not get lost with this new technology, our guide to buying the best tig welder will provide you with the necessary information to make the best possible investment.

Power and capacity

When working with a welder, the power establishes the actual operating capacity of the equipment. Therefore, this power must be in line with the need for the soldier that you are going to have and with the type of materials that you plan to use. If you are going to do small jobs you don’t need to spend more on power.

In any case, it is essential that this power can be regulated, so that the equipment can offer you different levels for all types of work. And obviously it is also necessary that the equipment has the systems that guarantee sustained power throughout use, so that you do not have power or amperage drop problems that can ruin the welding work you are doing. An inexpensive equipment that lacks these control mechanisms can end up being very expensive.

Equipment protection

Since tig welders work at high temperatures and with high electrical powers, it is essential that the equipment has self-protection systems that guarantee its proper operation and complete safety during use. In the case of heat, and since welders have a complex electronic control system, it is necessary for the equipment to have an adequate cooling system.

This system is usually based on fans that eliminate heat by blowing fresh air from the environment to the equipment, thus preventing it from heating up. Regarding electrical systems, the use of protection systems based on fuses is frequent, which absorb possible voltage peaks, preventing them from affecting the machine and damaging it.



It is essential that you eliminate from your comparison of tig welders any model that does not include these protection elements, since they will surely have a short useful life and poor operation.

Torches

Since tig technology does not use normal electrodes, as in inverter welding, what is really important are the torches that are used during the welding process. These torches incorporate the gas that allows welding, varying depending on the size of the area to be welded and the metals used. That is why it is important that the torch be of the material that we need for the welds that we plan to use and that they have a suitable size.

At this point, it is convenient to look for sets that offer torches of different sizes depending on the jobs you usually do. Do not forget to look for some basic elements such as the pencil torch, for small welding jobs or the large ones for superficial welding on a large surface. The torch change must always be quick, to facilitate the work, and models that do not have this function should be rejected unless you do not plan to use the welder for any other purpose than that for which said torch serves.

Top 5 Best TIG Welders for Automotive Fabrication [ 2022 Updated ]

TIG welding, which uses inert gases, is a mainly industrial type process, but one that you can do at home with the right equipment. Obviously not just any product will work, especially considering the cost of these equipment. That is why we have chosen for you some of the best TIG welders of 2021, among which you can start your search and learn more about this type of product.

HITBOX HF 2 in 1 TIG ARC Welder 

 
It is an inverter welder, so it incorporates an electronic system that provides a voltage without spikes to generate an optimal current. In this regard, it can provide high frequency (HF) and stick electrode (MMA) electric arc welding.

HITBOX HF 2 in 1 TIG ARC Welder 200Amp, 110V/220V Dual Voltage TIG/ARC Welding Machine, Inverter IGBT Stick MMA Welder Model HBT2000
  • 【Dual Voltage TIG / ARC Welder】 110V/220V 2 in 1 HITBOX welding machine, used as TIG welder or ARC...
  • 【IGBT Inverter】This Tig welder also uses an advanced compact IGBT inverter, designed with automatic...

In addition, it has the Hot Start and Arc Force functions, so it offers a precise and fast arc trigger at the same time, as well as continuous welding.

It also includes Anti Sticking technology, which helps to quickly disconnect the electrode if it accidentally sticks to the part. In this way, you can save material and speed up work. On the other hand, it is compatible with electrodes up to 4 mm in diameter.



Regarding the design, it is small and light, with measurements of 44 x 25.9 x 36 cm and 9 kg of weight, so you can move it and store it without too many complications.

To acquire the best TIG welder, you must carefully consider the characteristics of each model. For this reason, we present you the pros and cons of this product.

Pros

Inverter: It works with inverter technology, for a more precise and higher quality welding with less energy consumption. Likewise, it is compatible with coated electrodes.

Functions: It has the Arc Force and Hot Start systems, which allow a fast and precise arc trigger. In addition, it is intuitive and can be configured according to the needs of the project.

Practicality : It is very practical to move and store, since it is compact and does not weigh too much. In this way, it is useful in the home, but it is also suitable for small workshops.

Cons

Mask: It is important to note that the protective mask included in the package is very basic, so it is preferable to purchase a more professional one separately to increase safety.

Forney Easy Weld 261, 140 FC-i Welder, 120V, Green

 
This machine can generate high power direct current welding and is compatible with TIG and electrodes, being able to weld on surfaces of steel, stainless steel, copper alloys and titanium. In addition, it has a lower power consumption than conventional soldering irons.

Sale
Forney Easy Weld 261, 140 FC-i Welder, 120V, Green
  • EASY TO USE-140 FC-I MIG machine uses 0.30, flux core wire. It has infinite voltage and wire feed speed...
  • POWERFUL- Up to 140 Amp output that allows you to weld mild steel up to 1/4 in plate

Thanks to inverter technology, this device offers a maximum duty cycle of 60% at a power of 200 A. It also has high frequency (HF) ignition, capable of activating the arc without the need to touch the part you are welding. .



On the other hand, it is important to mention that it is very easy to use. For this reason, it is recommended for people with little experience in TIG welding. However, it can also be used by professionals. In this case, it is especially useful for the construction area, as it is small and does not weigh too much.

If you are looking for the best TIG welder of the moment, you may be especially interested in this model, since it provides great functionality at an affordable price. Let’s thoroughly review its main features.

Pros

Performance: It offers a nominal 60% duty cycle at 200 A power, so it can be used at home for small repairs and in professional environments, such as the construction area.

Ignition: Inverter technology provides high-frequency ignition, so that the arc of current is activated without the need to touch the workpiece with the electrode.

Versatility: It can be used to weld on steel, copper alloy, stainless steel and titanium, making it a versatile piece of equipment suitable for many projects.

Cons

Cable: The cable with the welding clamps that comes in the package is 2.5 m long, so it may fall short for some jobs.

TOOLIOM 200A TIG Welder High Frequency

The Ridgeyard CT312 is much more than just a simple TIG welder. Because in addition to this function, it can also work as a conventional inverter welder and even as a plasma cutter, bringing together three functions in a single product. For this, it has a total power of up to 120 amps, which you can regulate using the wheel placed on the front in order to adapt the intensity to the chosen task.

TOOLIOM 200A TIG Welder High Frequency TIG 110V/220V Dual Voltage TIG/Stick/Arc 2 in 1 IGBT Digital Inverter Welder TIG Welding Machine
  • High Frequency Start TIG :Non-contact arc initiation that reduces tungsten and material consumption.
  • Tig & Stick in One Welder:TIG welding make precise, critical welds when joining metals such as mild steel...

On the front we also find the function switch to choose the type of soldier or the cutting function. The kit includes the wiring for the inverter welding, the torch for the TIG welding and accessories for plasma cutting, no need to buy anything else.



A complete equipment that, due to its functionality and adjusted price, is considered the best TIG welder for value for money according to users and consumers.

When in doubt about which TIG welder to buy, it is better to continue researching and reading about models on the market. To make things easier for you, we want you to take a look at the qualities that this model offers because, perhaps, it could be your next acquisition.

Pros

Power : It offers a maximum power of 120 A, adjustable from its front panel with a knob that has 8 positions.

Versatility : Not only is it a welder with MMA and TIG capabilities, but it can also be used as a plasma cutter, just by adjusting the necessary parameters and required tools.

Accessories : In addition to incorporating everything you need for MMA and TIG welding, such as cables, hoses, hammers and connectors, it also brings everything you need to use it as a plasma cutter, without the need to purchase anything outside of its sale price.

Safety : It incorporates a ventilation system to keep the device at a safe temperature during use. Also, it brings a system against overvoltage, which disconnects the device immediately.

Cons

Safety : It incorporates a ventilation system to keep the device at a safe temperature during use. Also, it brings a system against overvoltage, which disconnects the device immediately.

YESWELDER 145A ARC MMA Stick Welder

 
Among TIG welders, a model that can be very useful is that of the Ipotools brand.

This tool works with a power of 200 amps, which you can adjust in the digital control panel that you will find integrated into the housing. With this ability, you can easily work with steel, titanium, aluminum, and copper alloys.

Sale
YESWELDER 145A ARC MMA Stick Welder with Lift TIG Torch, Digital Display 110/220V Dual Voltage IGBT Inverter Welder Built-in Hot Start ARC force, Stick MMA/Lift TIG 2 in 1 Portable Welding Machine
  • More powerful :Up to 145 more amps, Ideal performance for most 6010, 6011, 6013 and 7018 rods
  • Lift TIG Mode: Come with WP-17V gas valve lift tig torch, Simply touch the tungsten to the work piece and...

Evaluating its size, the equipment measures 32 x 41 x 19 centimeters and weighs approximately 16 kilograms, so it provides both a handle and straps for carrying it. It also has several light indicators, as well as screens where it will show the established operating values.

On the other hand, the memory system integrated into the welder’s system is quite useful, since it can store 10 different adjustment profiles, in order to choose the right one, depending on the material with which you are going to work.

When choosing a TIG welder, it is necessary to consider all the details regarding its performance, whether positive or negative, in order to make the best use of the money invested and choose the right one:

Pros

System: The machine works with a completely digital system, which provides you with a simple and appropriate configuration to your needs.

Welding: With this model of TIG welder you will be able to work various metallic materials, such as steel and aluminum, for example, allowing a freer and more suitable use for all types of applications.

Memory: It has a storage system that will be in charge of saving various operating settings that you have determined, to facilitate its handling.

Capacity: The functions, as well as the power of the machine, make it suitable for home and professional use, as you need.

Cons

Instructions: The user manual for learning to operate the equipment contains little information and may be in languages ​​that are incomprehensible to Spanish speakers.

PRIMEWELD TIG225X 225 Amp IGBT AC DC Tig/Stick Welder

 
This model works with electrode arc welding and also with tungsten inert gas (TIG) welding, making it one of the most interesting of this selection. In this regard, it is good to know that it offers most of the most modern systems, such as Hot Start and Arc Force, which improve the activation and accuracy of the arc.

PRIMEWELD TIG225X 225 Amp IGBT AC DC Tig/Stick Welder with Pulse CK17 Flex Torch and Cable 3 Year Warranty
  • 225AMPS TIG/STICK WELDER WITH PULSE FUNCTION WORKS GREAT WITH ALUMINUM, STAINLESS STEEL AND THINNER...
  • CK Worldwide 17 Series Superflex TIG Torch with Flex Head AND CK SUPERFLEX HOSE, ALSO INCLUDES CK DINSE...

Due to its state-of-the-art electronic operation, it is mounted on 3 PCB boards that include high-tech components. In this way, it provides good performance and offers a long service life without consuming too much electricity. In addition, it incorporates an EMC card, which guarantees compatibility to avoid possible interference with other devices and thus increase reliability.


On the other hand, it has a true duty cycle of 60% with a power of 180 A, so you can weld different types of metals in a short time and easily.

To carry out welding in different projects, it is necessary to review in detail the most outstanding aspects of each welding machine. This is why we present you the positive and negative characteristics of this product.

Pros

Welding: It can be used with tungsten inert gas welding and electrode arc welding. In both cases, it provides high reliability for more precise and resistant finishes over time.

Card: It is made up of 3 state-of-the-art PCB boards, which favor a more professional use. It also includes an EMC card, which protects the equipment from electromagnetic interference caused by other devices.

Accessories: It brings several accessories that considerably facilitate its use, such as a 4 m long TIG welding hose, as well as a 3 m electrode holder for greater practicality.

Cons

Screen: This model does not have a screen to display the selected power, which can be a disadvantage compared to other products in this selection.

How to use a TIG welder

When welding work is carried out, it is very important to avoid the presence of oxygen as much as possible to achieve a quality job, making it durable and solid. For this task there are tig welders, high power equipment, but very practical to work with and in this article we will tell you how to use them.

Clean the material to be welded

For the welding to correctly join the metals or the parts to be joined, it is very important that the materials are free of any type of residue that can affect the melting of the metals.

Give it the appropriate treatment according to the material you are going to weld: sand or polish if it is steel; scrape if you are going to work with aluminum. And use chemicals or solvents for stainless steel.

Prepare the mouthpiece

To use the nozzle to weld it is necessary that you put the tungsten electrodes required to join the metals. To do this you must unscrew the back support that holds the electrodes to the nozzle.

The next step is extremely simple: you must insert the electrode in the center of the nozzle, making sure that it is well adjusted and then screw the support back on. The electrode must have a certain distance in relation to the protective sleeve.

Set the polarity

Metals melt when they reach certain temperatures and for that you use the tig welder that you can configure according to the melting you want to make. To treat aluminum, you must adjust the polarity of the soldering iron for alternating current. For other metals such as steel or iron you must adjust it for direct current.

Fix the parts to be welded

When you are going to weld metal, as in the case of bars, you must keep them together in order to get the job done. For this you can use wire and tie them according to the way you are going to weld them. You can also use a clamp to do this, as it will help you set the angles you need.

Weld point to point

To advance in the welding work you must couple the metals, making point-to-point welding; This will help you to keep the materials well fixed when you start to weld and the whole piece. It is about making small welds every 10 cm or according to the distance that makes it easier for you to do the work.

Use the tig torch

With everything previously ready to work, it is time for you to use the torch to melt the metals. Turn it on and bring it closer to the metals you want to weld together with the electrode, keeping a 45 degree angle so you have a good view of what you are doing.

Use the pedal

The tig welder has a pedal that will allow you to control the heat generated by the nozzle. As you are going to work with different metals, you must use the pedal according to the level of heat that each one requires to achieve its melting. The more you press it, the more heat is generated.

A TIG welder is a tool that uses a power source in a constant way to weld different materials, since it generates an electric arc between the part to be worked and a non-consumable electrode. This new welding technology has been implemented for a few years by brands such as Stanley, Stayer and TIGMIG.

Since its foundation in 1843 and with an impeccable trajectory of more than 170 years, this brand remains one of the main in its field due to the reliability, value, innovation and quality of its tools, which year after year they have helped protect, build and provide solutions to our daily lives.

Its foundation was carried out by the visionary Frederick Stanley in New Britain, Connecticut, where he made the first works of the Stanley brand and since then they have been working hard and aiming for excellence to develop products that are suitable for all types of job.

For this brand, sustainability is important and minimizing the waste that as a company can spill onto the planet; An example of this is that in 2014 its facilities in Besançon, France, became the first company in that country to apply the “Zero Liquid Discharge Industrial”, which makes it a more environmentally friendly company.

Stanley has excellent and professional models of TIG welders that can work with a voltage range of up to 245 volts, which makes them perfect for variable voltage. You can weld a wide variety of metals such as steel or carbon, cast iron, and mild and stainless steel. In general, they work for almost any job you require.

Since the 1970s this brand has been constantly evolving to reach a total of 58 countries in which it has been present to date, becoming an international brand. Its clear objective of having a world-class reach indicates that despite being in many countries, it will continue to reach many more in the future.

At present its closest market is the European one and it is precisely where it has the greatest presence and development. In fact, Italy is the country where the brand was first conceived and it is also where it currently continues to have its main headquarters for the distribution of all its products to the rest of the world.

The brand has been expanding over time quite quickly to other countries on the European continent such as France, Romania, Poland, the Czech Republic, Turkey and Portugal. Similarly, Stayer has reached countries in North Africa, the Eastern Mediterranean, the Middle East, and also Latin American countries such as Ecuador, Uruguay, Argentina and Mexico.

Stayer has several models of TIG welder that can reach up to 315 amps and are used to carry out professional carving jobs, special for working with metals such as stainless steel, alloys, aluminum and many types of steels; Some models even include TIG torches with an automatic cooling system to work longer.


With extensive experience of more than 20 years, this company has been in charge of searching and selecting the best devices on the world market. In addition to that, their main philosophy is to create welding devices with high technology and quality available to all who wish to do so.

It is a leading company in everything related to sales of equipment for welding materials throughout Europe, since it has the best partners who handle the highest standards of product reliability, research and technology improvements with prices. most competitive in the market for end users.

Each product of this brand has a guaranteed satisfaction system for unconditional restitution within a period of no more than 10 days after the purchase, in case it does not comply with what is offered by the offeror. Your purchase will be protected by the laws and has a guarantee of up to 1 year.

The TIG welders of this brand are usually welding machines of excellent quality, with characteristics and functions that make them very complete and reliable when working on different materials; They can be used in a variety of environmental conditions, are often resistant to corrosion, and come in various sizes.

Leave a Comment