When looking for a budget power tool, $300 is a significant pricing threshold, particularly for table saws. You won’t get the top-of-the-line model, but it doesn’t mean you’ll get a low-quality saw.
We’ve highlighted our four favorite models of high-quality table saws under $300 in this buying guide. There is a lot of variation among the models, so which one you choose will be based on your previous experience, tastes, and budget.
Table saws allow you to cut edges that are as straight and clean as if they were produced in a factory. Table saws are the indisputable champion of rip cuts when utilized with the correct equipment. You’re well aware that you require a table saw as much as you desire one. However, they can be prohibitively pricey for many people.
Fortunately, there are inexpensive solutions on the market that are worth your money, but who is to determine what is excellent and what is bad? That would be HealthyHandyman.
We conducted our research and went up close and personal with some of the most popular models. Finally, three of these saws wowed us sufficiently that we would recommend them to you. However, in the following reviews, we’ll go over five of them so you can have a better idea of your alternatives.
Our Editor Choice's
10 Best Portable Table Saw Under 300 [2022 Edition]
The table saw is the workhorse of a professional construction, allowing them to produce quick, precise cuts in a variety of materials, from wood to metal to plastic.
For any aspiring carpenter, a table saw is also a must-have power table saw. Every DIY hobbyist eventually reaches a point when their circular saw is no longer cutting it, which is the ideal time to look into one of the best table saws under $300.
You’ll discover some excellent table saw alternatives at this pricing point to get you started in the world of table saws. To locate the best table saws for your unique needs, read on for our in-depth reviews and buying advice.
RANK#1: TACKLIFE Table Saw
- Motor: 15 amps
- Left rip capacity of 12 inches
- Right rip capacity of 24 ¼ inches
- 20-inch x 26-inch cast aluminum table
- Bevel Angle Range: 0° to 47°
- Heavy-duty steel stand
- EZ view measurement system for accurate settings
- Speed: 5,000 RPM
- Weight: 67 lbs
- Blade Size: 10″ Blade
- 3-year warranty
- Aluminum tabletop design
- Self-Aligning Rip Fence
The SKIL 3410-02 is at the top of our list. It’s difficult to believe that a job site table saw with so many features and benefits costs less than $300.
But it does, and, like the Dewalt 745, it would be an excellent choice for beginners or those searching for the best entry-level table saw.
The SKIL is on the heavier side for a portable table saw. It weighs 67 pounds, which is 50 pounds more than the Dewalt 745. Depending on your situation, this could be a benefit or a drawback for you.
If you’re going to be lugging this table saw from job site to job site, you might want to opt with something a little lighter.
If this item is going to be used in your workshop or garage, the added weight is a plus because it makes the tabletop more stable (and makes your cuts more accurate).
The tables itself is a good size, measuring 29″x21″. With a left rip capacity of 12” and a right rip capability of 24 14”, this table saw can make 3 12” deep cuts. It offers the most robust bevel range of all the saws in this class, ranging from 0° to 47°.
The SKIL’s motor power, especially in comparison to the Dewalt, is one feature that sticks out. Both have a 15 amp motor, however the SKIL table saw has 5,000 RPMs out of its. This is an excellent entry-level table saw.
With this tool, SKIL includes a self-aligning fence, which aids in the accuracy of the cuts. With these entry-level table saws, accuracy is what separates the men from the boys, and we found the SKIL to be the most accurate of the bunch. For precise settings, it also has an EZ view measurement system.
This could be due to the fact that it has a heavier design or a more precise fencing. Given that this is not a professional alternative, it cuts quite straight in either case.
One disadvantage is that SKIL does not include a dust collection port for use with this tool. Your shop will be covered with sawdust if you don’t have a dust collection system in place.
When it comes to a less expensive instrument, there’s always the question of how long it’ll endure. The SKIL aluminum extension table avoids this by offering the best warranty in the industry: three years.
For the finest low-priced table saw under $300, deciding between the Dewalt and the SKIL is a difficult task. In other words, neither instrument will let you down. Because of its substantial build, powerful motor, and 3-year warranty, we tip the scales in favor of the SKIL 3410-02.
- Features: Comes with peephole, LED light and blower for easier use.
- Low vibrations: Its exclusive Low Vibration system reduces vibrations for precise cuts.
- Blade change: The cutting blade is changed in seconds and without risks thanks to the SDS system.
- Lighting: According to the opinion of some users, the LED light does not provide great illumination.
RANK#2: Bosch Power Tools 4100-10 Tablesaw
- Motor: 15 amps
- Blade Size: 10″ Blade
- Miter Gauge
- Speed: 3,850 RPM
- Weight: 45 lbs
- Dust Collection Port
- 3 year limited warranty
- 0° to 45 degrees for beveled accurate cuts
- 20” Rip Cut
- Cast tabletop design
Power, versatility and safety is part of what the Bosch Power Tools 4100-10 Tablesaw has to offer . This is a tool with which you will be able to carry out with speed and absolute precision, from your simplest projects to those of greater scope.
Dewalt’s DEWALT (DWE7491RS) 10-Inch Table Saw, similar to the SKIL, is an incredible table saw.
This powerful table saw is lightweight and comes with the Dewalt brand name, which has become synonymous with quality.
The DWE7491RS, unlike the SKIL, is incredibly light, weighing only 45 pounds.
This portable job site table will appear nearly feather-light when compared to the SKIL. As difficult as it is to compare these two table saws, this is arguably the most significant difference.
This element alone can tip the scales in favor of the Dewalt if you need a very portable job site table saw. This hassle-free, super-easy-to-use portable job site table saw is simple to carry and set up across a number of job sites and locales.
When comparing the Dewalt DWE7491RS portable job site table to the SKIL 3410-02, another item to consider is the motor and power ratings.
The RPMs of the Dewalt 15 amp motor are 2,850, which is 25% less than the SKIL table saw.
Finally, Dewalt makes good use of the motor, and the difference between this and the SKIL motor is difficult to discern.
None of our testing yielded compelling results in either direction. So, unless you plan to use your entry-level table saw for exceptionally deep cuts, the difference is generally inconsequential.
For rip cuts, Dewalt offers a well aligned metal t-fence that is aligned on telescopic fence rails. Overall, Dewalt provides a very precise table saw with a range of 0° to 45° for beveled accurate cuts, and the lightweight construction is hidden by the sturdy cast tabletop design.
The 2 12” dust collection port is one of our favorite features of this Dewalt. This dust collection port prevents your shop or task site from being covered with sawdust right away, making cleanup much easier. A 3-year limited guarantee is also provided by Dewalt.
You can’t go wrong with either the Dewalt or the SKIL, as we previously stated… They are both superior to other table saw models in this price range.
While we favored the SKIL, if you’re a Dewalt user and fan, the DWE7491RS is the best portable table saw under $300.
Furthermore, if you require a saw that is both accurate and lightweight, this is the table saw for you, as well as our top recommendation for this buying guide.
- Chip deposit: It is equipped with a CleanSystem container that collects up to 80% of the dirt generated.
- Spindle lock: In this way the change of the cutting disc is fast and safe.
- Miter cuts: Tilts up to 45 ° for precise cuts.
- Heavy: Some users say that despite being small, the saw can be a bit heavy.
RANK#3: DeWalt DW7485 Jobsite Table Saw
- Highly portable, all-inclusive set
- 3” cut height
- Sheer tablet top for smooth cuts
- Weight: 50 lbs
- Blade Size: 10″ Blade
- Maximum Cut Depth at 45 degrees
- Motor: 15 amps
- Speed: 5,000 RPM
- 1-year warranty
- Low riving knife position for non-thru cuts
- Miter Gauge
- Safety key ignition
If you’re looking for your first table saw, this one might be the best choice. The WORX WX572L BladeRunner x2 Portable Tabletop Saw is nowhere near a higher-end professional table saw, and in our opinion, it is still much behind the Dewalt and SKIL.
This WORX WX572L BladeRunner x2 Portable Tabletop Saw, on the other hand, is versatile, practical, and nicely crafted for the occasional woodworking project.
If you want to learn how to use a table saw more, this is a good place to start.
This WORX WX572L BladeRunner x2 Portable Tabletop Saw is, for lack of a better term, “the best of the rest” on our list of affordable table saws.
This table saw has a 15 amp motor that spins at an incredible 5,000 RPMs. That is an amazing amount of power for the price.
With those kinds of specs, you’d be forgiven for thinking this table saw can do a lot more than it actually does.
Its performance is hampered by a shoddy table construction and mistakes in cutting and ripping. The blade’s alignment is incorrect, as is the miter gauge slot’s alignment.
This saw blade has a well-built rip fence and blade guard system and can make 3″ precise cuts. Adjusting the rip fence is a pain, but that’s to be expected at this pricing point.
To be honest, it’s good to see a solid rip fence and blade guard mechanism at such a low price.
Smaller, more precise cuts are best made using the WORX WX572L BladeRunner x2 Portable Tabletop Saw. You’ll notice both inaccuracy and binding with longer cuts. This table saw is prone to binding on longer cuts and is unsuitable for this type of woodworking.
Craftsman’s Safety Key system is included with this table saw. They invented and are famed for this feature, which prevents the saw from turning on until the safety key is inserted. While this won’t help you make cuts, it’s still wonderful to have this safety function.
This table saw is lightweight and easy to transport. While there is no stand included, it is an all-inclusive model, so you won’t have much to set up when you get on the job site.
While this review may appear to be unfavorable in general, it is not. To cut to the chase, this is a very low-cost table saw – to say the least, an entry-level saw. WORX makes no claims to being better than the competition, and it’s a fantastic entry-level table saw.
While it doesn’t compare to the Dewalt Table Saw 745 or the SKIL 3410-02, the WORX WX572L BladeRunner x2 Portable Tabletop Saw costs less than $200 and performs admirably on minor cuts. If you don’t have the funds to purchase one of the other two table saws, this is the next best alternative.
- Tilting head: Its head tilts from right to left for miter cuts at any angle.
- Versatile: Miter, jig and pull saw for multiple applications
- Chip bag: It incorporates a collection bag in which all the waste goes.
- Rotating table: It incorporates a rotating table that adapts to the cutting needs of the piece.
- Low illumination: The built-in laser guide offers a very dim light, according to the opinions of some users.
RANK#4: DeWalt DW745 Table Saw
- Motor: 15 amps
- Blade Size: 10″ Blade
- 3 ⅛” cut height
- Speed: 4,80 RPM
- Weight: 57 lbs
- 1.5” dust port
- 2 year warranty
- 23.6 x 21.6 size, 40×20″ extendable table
- Cast aluminum top design
- Push stick and blade guard for a safe operation
The Goplus 10 inch low-cost table saw completes our review. This table saw, like the Craftsman, has a powerful 15 amp motor that can spin at 4,800 RPMs. Those specifications, like Craftsman’s, can be misleading.
This table saw appears to tick a lot of the boxes on paper. It has a 3 1/8″ cut height, allowing you to cut through the majority of minor wood projects.
The metal roll cage on this table saw is surprisingly sturdy and durable, which helps reduce vibrations and improves blade accuracy.
The table construction and area size of the Goplus 10′′ Table Saw are two of our favorite features. It’s made of metal that’s been machine-engineered.
The table begins at a modest 23″x21″ and easily expands to 40″x20″. This provides you with a huge tabletop on which to perform cuts and rips.
Other noteworthy aspects include: A two-year warranty is provided by Goplus. A 1.5″ dust port is also present, which should not be overlooked. While not a required feature, it is one of the Craftsman model’s most distinctive features. It also has a blade guard and a push stick for a safe operation.
However, it faces the same difficulties as the Craftsman experienced in the end… This model, however, will cost a little extra. Because the table saw’s cutting accuracy is impaired, it’s difficult to recommend it for anything other than minor cuts.
- Adjustable cuts: The cutting blade can be placed in 4 positions for greater cutting capacity according to the piece.
- Big power: Its 1100 W power makes it a powerful saw that measures itself to different materials.
- Includes briefcase: The briefcase is robust, comfortable to transport and is responsible for keeping the saw protected.
- Non-adjustable speed: Some users miss that the speed can be regulated.
RANK#5: SKIL 3410-02 10 Inch Table Saw with Folding Stand
No home, workshop or work site can lack a good hacksaw, which is why if you are looking for an excellent quality one, I present the SKIL 3410-02 10 Inch Table Saw with Folding Stand.
This is a hand saw that can be tilted between 9 ° and 18 ° to suit the needs of each cut.
It comes equipped with a high quality 24 tooth / inch cutting blade , which is perfect for working with steel and offers a depth of cut of up to 9 mm.
Its revolver-shaped handle provides an ergonomic grip that conforms to the shape of your hand and allows you to exercise the control you need over the tool.
Undoubtedly, an inevitable bow saw with which you can do jobs of various kinds.
- Adjustable cuts: The cutting blade can be tilted between 9 ° and 18 °.
- Cutting blade: It comes with a high quality cutting blade special for cutting steel.
- Max 12-inch rip with fence
- Not very portable
- Very heavy and bulky
RANK#6: Genesis GTS10SB 10” 15-Amp Table Saw
The Genesis GTS10SB Table Saw is a good value for the money, but it lacks a few key functions that we believe are essential. However, we appreciate that this table saw comes with a stand, which is a big bonus if you’re going to use it exclusively in a workshop.
The rip is our biggest gripe with this saw. We were pleased to learn that it has a solid fence that locks in both the front and back. Its greatest rip capacity, however, is only 12 inches, which is insufficient for professional carpentry.
This saw is fantastic in a workshop, but it’s also really heavy and unwieldy, so it’s not a good choice if you need to carry it around a lot. Because it’s not very portable, you’ll want to keep it in one place. Even yet, if you do decide to take it out, it’s covered by a two-year warranty.
- Front and back rip fence locks secure your tool with a two-year warranty.
- With the fence, you may rip up to 12 inches.
- Very bulky and heavy.
- It is not very transportable.
RANK#7: TACKLIFE Table Saw
So far, we’ve just looked at tabletop saws that are designed to be tiny and portable. The TACKLIFE Table Saw is still small and portable, but it comes with a stand that raises it to an useable height, eliminating the need for a table. The TACKLIFE saw might be a top contender if our review was only based on this.
This saw currently has far too many problems for us to recommend it. To begin with, it has a rip capacity of only 1612 inches. We like a rip capacity of 24 inches or more for frequent use, thus this is simply too little for most applications. Furthermore, the barrier does not even tighten in a straight line. We had to check and tweak it multiple times before it was ready to cut every time we tightened it into place.
There was a lot to appreciate about this saw, including the supplied stand, the blade’s 45-degree bevel, and the affordable price. However, when compared to the other saws on this list, the TACKLIFE saw performed poorly and did not impress us.
Blade bevels to 45 degrees and comes with a stand to raise it to a usable height.
The maximum rip capacity is 1612 inches.
The fence does not straighten out.
RANK#8: Bosch GTS1031 10-Inch Portable Jobsite Table Saw – Best Value
This Bosch GTS1031 Jobsite Table Saw is a terrific tool that’s easy to move thanks to the one-handed carrying handle. While it is a good performance in most areas, we didn’t think it was good enough to beat out the DeWalt saws for the top two slots. Nonetheless, the Bosch offers a few distinguishing characteristics worth noticing.
The all-steel foundation, which is sturdy enough to endure any misuse, was one of our favorites. When the saw isn’t in use, all of the attachments can be stored in the convenient built-in storage.
However, we couldn’t get past the saw’s limited rip capacity. Only 18 inches will be available to the right of the blade, and only 734 inches will be available to the left. Despite having plenty of power thanks to its powerful 15-amp motor, the Bosch table saw falls short of earning our highest recommendation. However, we believe it is the greatest budget table saw for the money under $300.
- With a one-handed carrying handle, it’s simple to transport.
- The all-steel base can withstand any misuse.
- Storage space built-in
- The rip capacity is only 18 inches.
- During use, the blade adjusts its angle.
RANK#9: DeWalt DW745 Table Saw
DeWalt is a serious company, which is why their saws have earned the top two spots on our list. The DW745 Table Saw was our runner-up overall, but it couldn’t quite equal the DWE7485’s performance. Still, for a table saw under $300, 20 inches is a good rip capacity – it doesn’t come much better.
The DW745 uses a standard 10-inch blade, which makes it simple to change and gives you additional alternatives. It also has a powerful 15-amp motor that makes it glide effortlessly through whatever wood we pushed down the table.
This saw has a lower maximum rip size than the DWE7485, but a deeper maximum cut depth of 318 inches. Most semi-pro woodworkers like rip sizes greater than two feet. This keeps this unit from reaching the top spot. It’s also the more expensive of the two models, which is another reason we favor the DWE7485.
- 20-inch rip to the blade’s right
- Bevel cuts up to 45 degrees are possible.
- The 15-amp motor provides plenty of power.
- It’s portable because it’s small and light.
- The DWE7485 is more expensive.
RANK#10: DeWalt DW7485 Compact Jobsite Table Saw – Best Overall
The DeWalt DWE7485 Compact Jobsite Table Saw earned our top spot thanks to features including a 2412-inch rip to the right of the blade. This table saw has the best rip capacity of the budget table saws we tested, coming close to what more expensive models can handle.
This DeWalt saw cut through any OSB or plywood with ease thanks to its powerful 15-amp motor. However, with a maximum cut depth of 134 inches, cutting 2X4s with this saw will be a gamble. This is due to the 812-inch blade’s small size, which is more difficult to repair and doesn’t have as many possibilities as larger blades.
This saw’s sturdy metal roll cage impressed us. It’s definitely made to withstand the rigors of a construction site. Although this saw is tiny enough to be easily portable, it weighs slightly over 50 pounds. You’ll also receive on-board storage for all of your accessories, which will help keep your workstation tidy.
- 2412-inch rip to the blade’s right
- A 15-amp motor provides plenty of power.
- Components are stored on-board.
- Metal roll cage with a lot of strength
- It’s small and portable.
- The blade size of 812” is unusual.
- a maximum cut depth of 134”
Top Budget Table Saws Considerations
When looking for the best budget saws, there are a number of aspects to consider, as well as a few nuances to consider when looking at a less expensive model. Each has been highlighted here so you can see what to look for in your new power table saw.
Wood Cutting with Precision
When looking for the best budget saw, one of the most important considerations is the accuracy with which it can produce cuts. Accuracy is important regardless of the sort of table saw you buy, but it’s what differentiates the good from the terrible with a lower-end model.
The accuracy with which an entry-level table saw can cut wood is one of the most important variables to consider. Accuracy is important regardless of the sort of table saw you buy, but it’s what differentiates the good from the terrible with a lower-end model.
A table saw blade is seen up close.
The blade and gearbox makeup and construction of the best budget saws will have a big impact on how accurate it cuts. Both the Dewalt and the SKIL stand out in our evaluation as quite accurate, especially considering their low price.
Furthermore, the top budget table saw fence can assist you in making much more exact rip cuts.
Many of the selections in our best budget table saw review include metal fences, which is beneficial. Certain brands are more stable and lock in place than others.
Finally, the tabletop’s composition and construction have an impact on accuracy. Heavy-duty, all-metal table tops are more durable and absorb more vibrations generated by the best budget table saw blade.
This ability to absorb vibrations prevents various types of wood from constantly moving, resulting in more precise wood cutting.
As previously stated, getting a low-cost, accurate job site table saw is difficult. The Dewalt DW745 and the SKIL 3410-02 are the only two alternatives that really suit the bill. Given the pricing range, both are fairly true.
The Power of the Motor
Power is measured in amps at this lower end of the spectrum, with the average job site table saw producing 15 amps. Make sure you notice the measuring transition to horsepower when you go into the more expensive table saws, with some of the more powerful saws coming in at 4 horsepower.
Saws with 15 amps, on the other hand, are more than adequate for cutting popular woodworking materials and even some metals. In the finest table saw around $300, this type of motor will suffice.
Saws with a 15 amp motor can spin up to 5,000 RPMs, which is extremely rapid and provides the most value for your money. The capacity of a table saw to cut through a material is not solely determined by its power, although it is a significant factor.
A powerful engine is necessary for many of the cuts that a table saw is required to perform. This type of table saw is designed to make long, deep cuts into solid wood, which requires a lot of power. Some timbers are softer than others and do not require the same amount of force. Hardwoods, on the other hand, require a lot of energy.
Features of Safety
Table saws are, without a doubt, the most dangerous power instruments on the market. Power is delivered to an extraordinarily fast-spinning blade, which is capable of quickly cutting even the hardest of woods. After that, the user pushes the wood into the blade to make the cut, putting their hand in constant danger.
As a result, table saw safety features are critical, and any and all safety measures that a manufacturer can include in their table saw are recognized and appreciated. Power tools, such as the Sawstop, which stops the blade when it detects human flesh, are among the most advanced in terms of safety measures.
Even on the lesser end of the power tool spectrum, saws manufacturers have discovered a number of safety features to include in order to provide you with the best value. Craftsman’s “Safety Key” technology and Dewalt’s “Guard Detect” intelligent safety switch are both available.
Before you begin, make sure you understand how to use a table saw securely. Even if lower-end power tools don’t have as much power as more costly models, they nevertheless have enough to do catastrophic harm.
The majority of table saws under $300 are portable, which means they have wheels or can be readily carried by a handle from job site to job site to give you the best value. Here are some things to think about if it’s something you want:
Weight: The heavier the table saw is, the more difficult it is to maneuver (naturally). However, with table saws, the heavier the table saw, the more stable the platform, allowing for more precise cutting jobs.
Enormous table platforms: Some table saws feature large table platforms, which are wonderful for cutting large pieces of wood but make moving and working around more difficult. If portability is important to you, search for a saw with a foldable table or platform that you can use to transport it from site to site.
Stand: Some portable table saws come with a stand, while others offer it as an upgrade option on other power tools, and still others don’t have one at all. You’ll need a stand if you’ll be using a portable table saw in a variety of settings.
A hobbyist eager to increase their capabilities and the types of DIY projects they may tackle is the most prevalent type of person who buys a table saw under $300. As a result, usability is a crucial factor.
The table saw fence is one location that can be difficult to operate. Some producers focused on making it simple to use, store, and adjust by mounting it on rails and allowing it to adjust rapidly. Others make it a little more challenging by requiring many steps for each cut.
Even one of the greatest table saws under $300 will feature a few conveniences, but they aren’t the main focus of these models.
A table saw is shown in a hazy photograph.
Lining up the table saw blade and blade guards for bevel cuts is another difficult task. Some manufactures make lining up the blade simple by including a turn crank and a dial that displays the exact angle at which your blade is set. Others require you to measure the angle of the blade yourself, which is time-consuming and may yield inconsistent results.
Finally, at this pricing point, it’s difficult to expect too much convenience. However, being aware of the problematic areas is critical. That way, if you’re choosing between two models, you can consider ease of use as a deciding factor for a table saw around $300.
In any case, for a difficult piece of machinery like your best table saw, having a solid warranty is a good idea. At this pricing category, warranties are typically 1-3 years long and range from “limited” to “full.”
The most crucial aspect of the warranty for the best table saw is whether or not the motor is covered. This part can also be found with a warranty in one of the top table saws under $300.
Trying to press woodcuts while the table saw is banding can cause your motor to burn out. This is both unsafe and harmful for the engine, so stay away from it at all costs.
You won’t get a professional-grade finest table saw for less than $300. With these table saws, you’ll be sacrificing a lot of features, most notably exact accuracy and variable degrees of add-ons. This budget, on the other hand, will more than suffice to acquire you a nice beginner table saw or any other woodworking gear you desire.
It is not necessary for a tool to be pricey in order for it to work well. We set out to locate the best budget table saws under $300 with that notion in mind. We’ve limited down the options to three that we feel confidence suggesting after testing as many as we could locate and published short reviews comparing each of them.
The DeWalt DWE7485 was our overall favorite. A robust 15-amp engine and a tabletop large enough to allow for a 2412-inch rip to the right of the blade are included in this small and readily portable saw.
Another DeWalt, the DW745, came in second. This one is pricier and has a shorter maximum rip length, but it also has a deeper maximum cut of 318 inches and utilizes normal 10-inch table saw blades.
Finally, if you’re looking for the cheapest alternative that still does the job, the Bosch GTS1031, our best value, is a great choice. It has a lot of power and a good rip capacity.
It’s difficult to find a table saw that isn’t a good choice at the higher price points. However, there is a lot of difference in the brands and models available at this pricing point. The Dewalt DW745 and SKIL 3410-02 are clear favorites, outperforming the competition by a wide margin.
In the end, the one you choose will be determined by a few crucial aspects – both alternatives are rated as one of the best budget table saws under $300 in our study and buying guide. Good luck with your woodworking and DIY projects!