10 Best Bandsaws for Woodworking [2022 Updated]

If you are looking for a band saw, whether it is for professional use or simply for hobby use, in our buying guide you will find everything you need to know in order not to risk finding yourself with an inappropriate tool for your needs.

You will also find the review of the band saws most requested by consumers, starting with the NEBES TM195 Inverter , appreciated above all by professionals thanks to its excellent quality-price ratio, and the Fervi 350 0717 , a much cheaper model for hobbyists.

10 Best Bandsaws for Woodworking [2022 Updated]

VEVOR Portable Band Saw

 
The TM195 band saw for iron is produced by the Italian company NEBES Elettromeccanica, which specializes in the production of high quality power tools mainly intended for professional use, in particular saws, grinders, cleaners, drills, vacuums and related accessories.

VEVOR Portable Band Saw, 5Inch Cutting Capacity Cordless BandSaw, Variable Speed Hand held Band Saw,10Amp Motor Portable Bandsaw, Deep Cut Bandsaw for Metal Wood Tubing Pipes Rebar and Plastic
  • Huge Cutting Capacity: The cutting capacity of the band saw: without base: 4.7"x4.7" deep-cut capacity...
  • Powerful Motor: 1100W 10 amp powerful pure copper motor, designed with controlled power to withstand any...

According to the opinions of buyers, professionals and non-professionals, of all the models currently sold online, the TM195 Inverter is one of the best band saws of 2021; in addition to a solid and resistant cast iron structure, in fact, it is driven by an induction motor that does not require any type of maintenance and is at the top of its performance for intensive work. The motor is controlled by an inverter board and is available in two different speeds.



It works with a voltage of 230V and absorbs a power of 2,000 Watt, it is capable of cutting wood, metal profiles and even thin sheets, using the appropriate blade, the only limitation is represented by the considerable cost.

Pros

Professional : This is a professional band saw in all respects, because it is specially designed to withstand an intensive, albeit sporadic, workload.

Induction motor : NEBES uses state-of-the-art technology and the TM195 has a maintenance-free induction motor, controlled by an inverter board that modulates its speed.

Reduced consumption : The further advantage of the inverter induction motor is to offer the performance of a normal 2,000 Watt electric motor, as indicated in the specifications, with a real consumption of half: only 1,000 Watt.

Cons

Price : The cost is very high, but so are its performance and structural quality: it is the top of the band saws we have compared, but it is the exclusive prerogative of professional craftsmen.

Bosch Bare-Tool BSH180B 18-Volt Lithium-Ion Compact Band Saw

The Fervi 717 band saw for wood, on the other hand, has neither the new induction motor nor the power of the model examined previously, but on the other hand is characterized by a decidedly competitive price. The ease of use and performance offered by this band saw also make it ideal for hobbyists and carpentry enthusiasts who enjoy doing small jobs in their free time or on weekends.

Bosch Bare-Tool BSH180B 18-Volt Lithium-Ion Compact Band Saw
  • Best-in-class compact size up to 60-percent lighter than deep cut saws and up to 40-percent more compact
  • Integrated LED work light: illuminates the cut line in dark areas

It is driven by a 350 Watt single-phase motor, therefore it consumes relatively little, and generates a fixed cutting speed of 13.3 meters per second; the worktop measures 290 x 290 mm and can be tilted from 0 to 45 degrees, while the cutting capacity is 190 x 85 mm, respectively in length and height. The quality of materials and finishes is barely sufficient, however, also adjusting the flywheels is somewhat complex.

Pros

Economical : The Fervi 350 band saw ranks among the best-selling models above all thanks to its affordable price but of course the performances are sized for amateur users.

Robust : Although the manufacturing materials are of average quality, the structure of the Fervi bandsaw is characterized by a slightly higher strength and solidity than the models sold at low prices.



Ideal for carpentry : The Fervi band saw is especially designed for cutting wood, and in fact buyers report that it tackles all types of wood without problems: olive, walnut, mahogany, oak and other varieties.

Cons

Manual and adjustments : The instructions are superficial and extremely lacking, so adjusting the machine to make it precise in the cuts is a long and complex operation, especially for inexperienced hobbyists.

Milwaukee 2429-21XC M12 Cordless Sub

 
If you are interested in knowing where to buy a band saw at a really bargain price, then you should take a close look at the model produced by the German company Einhell, whose distinctive feature is that it is the cheapest of all those examined in our guide.

Milwaukee 2429-21XC M12 Cordless Sub-Compact Bandsaw Kit
  • One-Handed Cuts: Most compact size and lightest weight of any cordless band saw; SFPM: 280
  • Powerful Motor: Cuts 3/4" EMT in 3 seconds, up to 150 cuts per charge with the XC battery; Blade Length:...

It has a power of just 250 Watts, but still ensures a working speed of 1,400 rpm, can perform straight, curved, oblique or transverse cuts and, depending on which blade is mounted, can cut both wood and plastic and non-ferrous metals, such as aluminum for example.



The cutting height can be adjusted up to a maximum of 80 millimeters, 45 instead for miter cuts, it is equipped with parallel guides and is also designed to be connected to a dust extraction system, via a nozzle with a diameter of 36. millimeters.

Pros

Cost : It will be difficult to find a band saw that costs less and is able to offer the same build quality; despite being a well-known brand in the economic range, in fact, Einhell is highly appreciated for the good quality level of its products.

Solid : The Einhell band saw is made of steel, so it is solid and quite robust, which is not so obvious among power tools belonging to the low-cost product range.

Versatile : Although intended only for sporadic and non-intensive use by novice hobbyists, it is versatile enough to allow for both cutting of wood and laminates and plastic profiles.

Cons

Coarse finishes : The flaw of Einhell products in general, unfortunately, is the lack of attention to finishes, so the assembly is mediocre and affects the precision of the cuts.

Makita XBP02Z 18V LXT Lithium-Ion Cordless Portable Band Saw

 
BASA 1.0 is the ideal machine for cutting small pieces of wood; it is in fact an electrically powered bench band saw produced by the well-known German company Scheppach.

Makita XBP02Z 18V LXT Lithium-Ion Cordless Portable Band Saw, Tool Only
  • 4-3/4" Cutting capacity accepts a 44-7/8" Blade and is ideal for cutting multiple metal materials
  • Makita-built motor delivers faster cutting with variable speed 275-530 ft./min.

Its compact size is ideal especially for those with space problems; the machine, in fact, has a basic footprint of just 440 x 395 millimeters and a height of 710 millimeters. The worktop can be adjusted to perform both perpendicular and inclined cuts up to 45 °, with a maximum thickness of 100 mm; it is driven by a 300 Watt motor and is designed for connection to a dust extraction system.



Also included in the package is the precision rip fence with sight glass, which can be mounted either to the right or to the left of the blade position. The only flaw is the laborious setup.

Pros

For model makers: BASA 1.0 is particularly suitable for model-making enthusiasts, especially the naval one, and for craftsmen who make objects in wood and other materials.

Compact: The small dimensions allow it to occupy a minimum footprint, moreover it has a low noise level and is designed for connection to a vacuum cleaner, so it is also good in the home.

Solid: The steel structure is very sturdy and ensures perfect stability to the machine, which ensures the execution of precise cuts and with an excellent degree of finish.

Cons

Screws and tuning: The small parts supplied for the assembly of the components have to be replaced, and the tuning of the machine is laborious to perform.

DEWALT DCS374B 20V Max Deep Cut Band Saw

 
The FEMI 782XL band saw is another professional type model designed for more experienced hobbyists and for craftsmen who use it intensively but occasionally, based on the commissions received.

Buyers appreciated it above all for its robustness and power; thanks to its 950 Watt, in fact, the 782XL is able to cut metal bars with round, square and rectangular section without lubrication up to a maximum height of 105 mm for perpendicular cuts and 65 mm for those inclined at 45 degrees.



It has two switchable speeds, a heating sensor and safety protection, a support surface with a vice for clamping the pieces to be cut and prismatic guides for making precision cuts. The only flaw is represented by the support surface of the vice, which stops at such a distance from the blade as to make it impossible to cut small pieces.

Pros

Ideal for metals : FEMI band saws are especially appreciated for their efficiency in cutting non-ferrous metals with thicknesses up to 100 millimeters. First, however, it is advisable to break in the blade by cutting with light cuts, applying little pressure.

Compact and precise : The dimensions are such as to allow it to be transported quite easily, so that it can also be used outdoors if necessary, furthermore the prismatic guides make it extremely precise.

Lubrication-free : The 782XL features an 8/12 teeth-per-inch cobalt bimetal blade, capable of cutting metal without the use of any type of lubricant.

Cons

Choices : The vice is designed in such a way that it stops at a certain distance from the blade, which makes it impossible to use it to cut small pieces.

DEWALT DCP580B 20V MAX Brushless Planer

 
The Femi NG120 XL is a specific band saw for metals, especially profiles, which can cut with minimal effort even without resorting to the use of lubricants. The construction is very solid, even if not perfect; despite being proposed as belonging to a “professional series”, in fact, the NG120 XL remains a band saw that is placed in the Top segment of the hobbyist range.

Sale
DEWALT DCP580B 20V MAX Brushless Planer (Tool Only)
  • Brushless motor of the electric hand planner provides power and runtime
  • The hand planer featuring 30,000 cuts per minute achieves a fast removal rate

It is driven by a 1,300 watt motor equipped with an electronic speed regulator, and it is also safe to use as it integrates the thermal protection, the amperometric limiter, the anti-reset function and the abatement filter for electromagnetic disturbances.

It has a cutting capacity of 120 x 102 mm with an adjustable angle from 0 ° to 60 ° and quick lock for the positions at 45 ° and 60 °; Furthermore, the NG system considerably reduces cutting times.

Pros

Performance: Although still a hobbyist power tool, the Femi NG120 XL band saw offers respectable performance, especially as regards cutting times.

NG System: Its efficiency in reducing cutting times by up to 60% is due to the NG system, which allows the direction of rotation of the blade to be reversed, and the exclusive Femi patented blade tensioner with clutch, which allows you to perfectly adjust the tension of the blade. lama.



Safe: The NG120 XL is prepared for fixing to the workbench, has several integrated safety devices and also the anti-reset function, to prevent the blade from starting automatically following a sudden blackout.

Cons

Price: Since it ranks at the top of the hobbyist range, the price of this band saw is quite high and therefore only accessible for the most demanding.

Dewalt DCS377B 20V MAX ATOMIC Brushless Lithium

 
The 780XL is also produced by the Italian company Femi but, in this case, it is a relatively compact portable band saw, and consequently the cutting capacity is also limited to a maximum thickness of 105 mm.

Sale
DEWALT DCS377B ATOMIC 20V MAX* Brushless Cordless 1-3/4 in. Compact Bandsaw (Tool Only)
  • One-handed and overhead cutting with the integrated guard.
  • Variable speed trigger and speed dial allow for easy speed adjustment to match the material being cut.

Among its strengths are the safety protections against overheating, against automatic reset in case of blackout and the filter for the abatement of electromagnetic disturbances in compliance with current regulations; it is driven by an 850 watt motor with two electronically commutated speeds.

The flaws are the poor precision, as the blade guide is completely devoid of a system that can regulate its inclination, and the motor which works in periodic intermittent service S4-20%, i.e. every 4 minutes at normal speed, alternates one at 20% of the power; feature not shown in the description but indicated only on the engine.

Pros

Price: The cost of the Femi 780XL bandsaw is easily accessible even for those on a tight budget, which has made it quite popular in the hobby market segment.

Portable: The compact dimensions make it particularly suitable for DIY enthusiasts who have space problems, and also allow it to be transported with extreme ease if necessary.

Safe: The 850 watt motor is equipped with thermal protection, in addition there is also the filter for the abatement of electromagnetic disturbances and the safety anti-reset function.

Cons

Poor precision: The blade guide has no adjustment system and this, unfortunately, negatively affects the precision, especially in inclined cuts.

Milwaukee 2729-20 M18 FUEL Deep Cut Band Saw

 With the Vigor we return for a moment to the economic range models; the VSN-350, in fact, is a table band saw intended for beginners and for sporadic and less intensive use in general.

It is a compact and relatively light model, which can be transported when needed without too many problems; it has a power of 350 Watts and can perform cuts up to a maximum height of 80 millimeters and a width of 190 millimeters. The worktop measures 290 x 290mm and can be freely adjusted in an arc from 0 to 45 degrees.



The Vigor bandsaw is only compatible with 1425mm blades, 1,400mm blades are not suitable, moreover, according to buyers, its power is low and makes it barely suitable for wood, as with the harder varieties already begins to show visible signs of fatigue when cutting.

Pros

For Advanced Hobbyists : Buyers have appreciated it because when used within its design limits, the Vigor bandsaw is great for experienced hobbyists specializing in woodworking.

Sturdy and reliable : From the structural point of view it is well made, entirely built in metal, therefore solid and robust; the power slightly higher than that of the models belonging to the same price range also makes it more reliable.

Economic : The quality-price ratio is decidedly favorable and the economic cost makes it easily accessible for anyone.

Cons

Performance : The performances are obviously modest; apart from the impossibility of cutting other materials with the exception of wood, moreover, even with the latter you have to pay attention to the degree of hardness.

Anbull Portable Band Saw 

 
Even the Metabo band saw is characterized by a modest power, but all in all higher than that possessed by the low-cost Entry Level models, given that it has an absorption of 400 Watts.

Anbull Portable Band Saw with Removable Alloy Steel Base, 45°-90° Metal Cutting, 10A 1100W Motor, 5-inch Deep Cut, with .025-by-44-7/8-Inch 14 TPI Saw Blade and Led Spotlight
  • 1100W Powerful Pure Copper Motor: Industry best 10 amp motor designed with controlled power to withstand...
  • The Cutting Capacity: without base :5-by- 4-3/4 In. deep-cut capacity for rectangular stock, 5 In....

Its structural characteristics, however, the manufacturing materials, the assembly and the care in the finishing are characteristics of an equipment which, although intended for hobby use, is characterized by an above average level. The German brand Metabo is in fact known above all for the quality and reliability of its products, as the technical characteristics of this band saw amply demonstrate.

The BAS 261 is capable of cutting wood, plastic and metal with extreme precision, it is equipped with a universal blade, guides for precision cuts, even parallel, LED light to illuminate the work surface, silent and maintenance-free induction motor. it is also protected against accidental starting. The only limitation is the price, over 450 euros.

Pros

German quality and reliability : The Metabo brand is known for the high quality of its production processes and the materials used, which ensure a professional level of performance.

Versatile : With the BAS 261 band saw you can cut anything, because it is equipped with a universal blade that can cut wood, plastic and metal.

High comfort of use : Unlike other models, it is designed to offer maximum ease of use, in fact it is equipped with LED light to illuminate the cutting line and is designed for connection to a vacuum cleaner.

Cons

Cost : This is an expensive band saw, mostly intended for a particularly demanding private user, or for craftsmen who work on a small scale.

Milwaukee 2429-20 Cordless Sub Compact Band Saw

 
According to the buyers, the FEMI 748XL is the best band saw among all those examined in terms of yield, efficiency and precision in metal cutting, with performances clearly superior to the 782XL examined previously, also produced by the company FEMI.

Sale
Milwaukee 2429-20 Cordless Sub Compact Band Saw
  • Its compact size and lightest weight amongst cordless band saws easily allows for one-handed cuts
  • Powerful motor cuts 3/4-in EMT in 3 seconds, up to 150 cuts per charge with the XC battery

In fact, to the solid and robust structure shared with the 782XL model, the 784XL adds a power of 1,200 Watts and an electronic potentiometer that allows you to adjust the cutting speed in an optimal manner, according to the size of the piece to be cut.

Otherwise it has the same great features as the 782XL, including the solid vice made from a single piece of die-cast steel, the guides to increase the cutting precision and the tilting work table from 0 to 45 degrees. The only limitations of the 784XL, according to buyers, are given by the inability to cut small pieces and by the cost, which exceeds 500 euros.

Pros

The best for the hobbyist : DIY enthusiasts and small crafters will not find a better performing band saw than this one, designed to offer top performance in metal cutting at the hobby level.

Powerful and precise : It has the remarkable power of 1,200 Watts and cuts metals effortlessly and incredibly precisely, thanks to the solid cutting guides.

Versatile : The dimensions allow it to fit comfortably on a bench of any type with minimum space, and to load it easily on a vehicle to be transported when necessary, and used for outdoor work.

Cons

Cost : Also in this case we are faced with an excellent band saw, but whose high price limits access only to the most demanding hobbyists and craftsmen.

Buying guide – How to choose the best band saws?

The professional band saws

Do you want to know how to choose a good band saw? Nothing could be simpler, first of all ask yourself what you need, how often you intend to use it and what is the amount of work to which you are going to submit the machine. The most important aspect to consider also, to understand which band saw to buy, is whether the tool must be used in a professional environment, such as a large workshop or laboratory, or in an artisanal and hobbyist one.


It goes without saying that the amateur level user sector is the largest not only when it comes to power tools, but also as regards the most demanding and complex work machines, embracing two market segments: the economic and the medium one. . On the other hand, high-quality and high-performance machines, designed specifically for professional use, are placed in the highest range.

If you have come across this article because you are looking for such equipment to buy online, to save something on the expense, you are already perfectly aware that the amount to spend is over 1,000 euros and it varies according to the size and characteristics of the model. For the professionals who follow us, in fact, we have reported a high-end specimen, the NEBES band saw, on which you can learn more in the relevant review.

The economic range models

The considerable price of professional band saws must in no way act as a deterrent; not only are the performance and structural quality of the machine superior, the technology they employ is superior as well. All the high-end models, in fact, are equipped with the new electromagnetic induction motors, which for the same power output consume half of the electricity and offer the additional advantage of not requiring any type of maintenance or periodic replacement of parts.

For a simple DIY enthusiast, however, such equipment is disproportionate in all respects, starting with the purchase cost. If the needs are exclusively of a hobby type, then, the market offers a wide choice of models in the cheaper range, the cost of which can fluctuate from about 100 to 200 euros depending on the model.

As you can see, the expense for an inexpensive band saw is easily accessible for anyone, but the models belonging to this range are almost all affected by a lack of attention and quality as regards the assembly and finishes of the various components, depending on the model. and of the manufacturer, therefore, you may come across rather loose and imprecise cutting guides, or the lack of clear instructions on how to adjust the machine or even second-choice manufacturing materials, not very resistant and more subject to oxidation and wear.

In view of an occasional and not intensive use of the tool, however, economic band saws offer a good level of performance, especially if you do not have great needs.

The mid-range band saws for experienced craftsmen and hobbyists

For the more experienced hobbyists and artisans who have managed to create a small market for their creations, however, we strongly recommend moving towards the intermediate price range. The expense to be incurred for a medium-level band saw ranges from 250 to 500-600 euros, so it is still quite demanding, on the other hand, however, the machine is characterized by an assembly and a superior quality, consequently the precision and performance. offers are of a good standard and improve further as they reach the top of the range.


The further advantage offered by the models of the medium segment is their specificity of use, which helps to contain the costs of the tool; some are particularly suitable for cutting metal, in fact, while others are suitable for wood and plastic; in some cases, moreover, it is not uncommon to have the opportunity to find a mid-range saw equipped with an induction motor like the high-end professional ones, such as the Metabo we examined previously.

The mid-range band saws, therefore, are optimized to offer maximum yield even with an intensive workload, but are naturally limited in terms of frequency of use, since they cannot cope with an intensive work rate. on a regular basis, like the professional models used in the industrial sector.

Frequent questions

What is the band saw used for?

The band saw is a tool originally designed for woodworking, specifically for cutting large logs in order to obtain beams, boards and pieces of various sizes intended for further processing or for use in the construction field.

Today’s band saws are more advanced than the first examples introduced on the market; the advances in technology, energy and materials, in fact, have considerably expanded the versatility of use of these machine tools, and are able to cut not only wood, but also other materials such as plastics and metals.

The applications of the band saw are therefore numerous, and if to cut one material or the other it is sufficient to simply change the blade mounted by the machine, the dimensions of the same instead limit its intended use.

In the workshops where trunks are processed first, for example, which despite having been previously sawn into sections, still retain a considerable size and weight in any case, special band saws mounted on motorized frames are used, with the blade frame positioned horizontally. This type of band saw is therefore made to slide on rails and move as the blade sinks into the trunk, while the latter remains immobile on the support.

In the joinery and carpentry workshops, on the other hand, fixed band saws with vertical frame are used, where the only moving element is the worktop.

If in the industrial band saw it is the latter that moves and inclines thanks to the electronically controlled servomotors, then, in the workshop band saws the exact opposite occurs: the machine is fixed and it is the operator who has to move, tilt and push the piece to be cut towards the moving blade.

In the small workshops of carpentry and cabinet making, and in those of hobbyists who love do-it-yourself, on the other hand, bench band saws are widely used; these represent the cheapest and most widespread category, given the high catchment area which is made up of both private hobbyists and small professional craftsmen.

How to use a bandsaw

How to build a bandsaw

To build a band saw from scratch there are two possible alternatives: the first consists in following a well-defined project on paper, using first choice materials and equipment purchased specifically for the purpose; the second, on the other hand, involves the use of recycled materials, in order to save as much as possible on the overall cost, adapting them as needed.

The first alternative is extremely expensive and, from whatever point you want to consider it, it is inconvenient compared to buying a band saw ready to adjust and use. The same argument, in reality, also applies to the second alternative, that is the one that involves the use of recycled materials, since what is saved in money is lost in the time required to build the tool, which increases more or less considerably on the basis of the work to be done on the recovered materials.

Just to give a practical example: if you have decided to save at all costs and want to build a band saw using recycled material, first of all you will need to get everything you need from one or more scrap shops.

You will therefore have to start first with an electric motor complete with condenser, perhaps that of an old washing machine, then flanges, pulleys, bolts, nuts and other small parts to create the flywheel system on which the blade will be mounted. Both the flywheels and the main frame of the bandsaw, to save further, can be made from chipboard, multilayer or MDF panels, and will therefore have to be subjected to further processing.

The wooden panels can also be safely used to make the body that will cover the engine and all the mechanical parts once assembled, with the option of making it in one piece or made in such a way that it can be easily opened if necessary. to perform periodic maintenance on the mechanics.

As you can see only from the list of materials, therefore, the amount of work to be carried out is considerable, it requires the use of specific equipment and, above all, all the time necessary to devote to construction. Considering that there are band saws on the market that cost just over 100 euros, you can easily guess that it is absolutely not worthwhile to embark on the construction of a power tool of this type, even starting from recycled materials, even more so if the The equipment is for hobby use only.

Leave a Comment