5 Best Angle Grinders For concrete [2022]

Whether cutting, sanding or grinding, the uses of an angle grinder are multiple, as long as we make a good purchase. For this, it is necessary to look for products with a wide power, with which to be able to do all kinds of work, and a system of interchangeable discs with which to always choose what we need for each project. The favorite model of consumers of the moment is the Bosch GWS 7-125 Professional model that has a power of 720 watts at 11000 revolutions per minute and an easy disk change system with which you can carry out any job comfortably and without hardly any effort. Also attractive is the Tacklife P9AG125 model, ergonomically designed equipment to be firmly handled in any DIY project. It has some spare discs and also a practical briefcase to store or transport it.

Buying Guide – What is the best angle grinder on the market?

The angle grinder is a versatile tool, which makes all kinds of cutting, sanding or devastating jobs of any kind of materials easier. To equip yourself properly, follow the advice in our guide to buying the best angle grinder, with which you will find quality models that give it that touch you are looking for in all your DIY jobs.

Operating power

When choosing an angle grinder, the operating power is one of the elements that we must take into account to avoid falling short when carrying out any work. A power that, as we will see when talking about the disc, it is necessary to adapt to the tasks that we are going to carry out, so that the product has sufficient capacity to perform them efficiently.

If we take a look at any comparison of angle grinders on the market, we can see how the powers tend to be around 700 watts approximately, within the general models with a 115-millimeter disc. This power is enough to generate a level of rotation of about 11,000 revolutions per minute, with which to move the disc properly and obtain adequate performance when working. However, as with power, this speed has small variations in terms of the maximum idle rotation that can be achieved with the product.

It is convenient that this speed can be adjusted easily, since not all materials or tasks require the same power. If we are talking about more fragile materials or more precision work, it is important that the speed is adjusted downwards, to avoid their deterioration during the work. That is why the speed control system should be evaluated, which should be as versatile as possible.

Disc Features

If the operating power of the product is important, so is the disk that is moved by the motor. Depending on the type of work you are going to carry out, you will have to use another disc, also having different measurements and thicknesses, which also fit these jobs. You should know that, if the grinder mounts a large disc, you will be able to mount smaller discs, but not the other way around.

Specifically, the most common grinders are usually 115mm in diameter, being practical and light for carrying out small jobs. Discs that are effective in cutting and grinding material, although their cutting capacity is about 20 to 30 mm, which means that it loses efficiency with thick materials. In this case, we can bet on models with 230mm discs. These discs allow you to work with thicker materials and be more efficient when working on large materials.

In addition to the above, it is also necessary to assess the way the discs are changed. A task that must be simple, so that it is not necessary to pull many tools or spend too much time in the change process. A fundamental question to avoid inconveniences during the process and also to maintain due safety in the work process, which must even be above how much the grinder costs.

Comfort and safety

To finish our advice to find a good and economical angle grinder, we will review both the comfort of use of the product, as well as the safety it offers us when working. Two fundamental elements in any power tool, but even more so when it comes to cutting and sanding tools like the ones we are discussing.

On the comfort side, take a look at the handles or fasteners of the product. In general, these models have a main holding handle together with a secondary handle, which allows to maintain the position of the cutting area and helps to better control the process. If, in addition, the product has improvements such as a vibration reduction system or similar, everything is easier to use.

Regarding the safety of the product, it is essential that the product includes a protection shield that prevents possible remains from sanding or cutting from jumping onto our faces. In this security, there must also be a mechanism that stops the operation of the disk automatically in case of problems, to avoid risk when working for a smooth operation of the disk.

5 Best Angle Grinders For concrete [2022]

For those of us who love to do all kinds of home repairs with our own hands, an angle grinder is the perfect tool for precision cutting, polishing and grinding of wood, metal and all kinds of robust materials. If you are looking for an angle grinder pay attention to this small selection that we have made very carefully in order that you can buy the best angle grinder in its value for money.

1. DEWALT 20V MAX* Angle Grinder Tool

Main Advantage:

It is a model of angle grinders that complies with a proper operation, this as the opinion in which its buyers agree the most. It is a light device, which has a start-up according to the demands of its buyers, in addition to its light weight and facilitates its handling.

Sale
DEWALT 20V MAX* Angle Grinder Tool, Tool Only (DCG413B)
9,229 Reviews
DEWALT 20V MAX* Angle Grinder Tool, Tool Only (DCG413B)
  • Brushless motor of the angle grinder requires no brush changes.
  • DEWALT grinder's brake stops wheel in 2 seconds or less on average
  • Kickback Brake engages when a pinch, stall, or bind-up event is sensed and the electronic brake engages...
  • Features E-Switch Protection - When the ON/OFF trigger switch has a no-volt release function. In the...
  • Two stage trigger requires two actions to activate tool.

Main disadvantage:

Its customers point out that this model overheats after a certain time of operation, which could slow down the domestic tasks that are carried out at home. In such a way that it is imperative to stop the work and wait for it to return to a suitable temperature to use it again.

Verdict: 9.8 / 10

Thanks to its functionality, this is one of the best quality-price ratio grinders, as it meets the characteristics that users need and its acquisition does not represent an excessive expense.

Main Features Explained

Materials

It is a model that has an aluminum casing, which guarantees durability over time, in addition to ensuring that its coating will not suffer greatly from bumps or scratches that could be made when handling it or taking it somewhere.

It has ventilation inlets with a special design that give you the possibility that your engine has a proper cooling. That is, there will be no overheating due to its use, but the product itself is well manufactured to withstand the temperatures it reaches.

Power

The Bosch GWS 7-125 Professional model has a nominal power of 720 watts and an idle speed of 11000 revolutions per minute, this means that its power to work on any surface will be satisfactory and efficient. Even for working on metal surfaces, this angle grinder will be able to accomplish a job with expected results.

It has a 125mm disc, coupled with a lightweight 115mm diameter rubber plate that allows it to perform quality work on the surfaces that are available. Now the DIY or surface improvement work at home will be a simple and satisfactory task, very much in line with our main needs.

Security

The Bosch GWS 7-125 Professional angle grinder has carbons that serve for self-disconnection, to stop the motor correctly once the trigger is released. This implies that we are not going to cut ourselves, nor will the surface on which we work have damages, in addition to making its usability more intuitive and simple.

In addition, it has a special button, suitable for unlocking the blade in just one step, without the need to incorporate more tools for this, which will make the work that is being developed easier. It has a security cover against torsion, giving more protection to the user who manipulates it.

2. Makita 9557PBX1 4-1/2″ Paddle Switch Cut

Tacklife P9AG125 is the name corresponding to an angle grinder with which you can do various jobs at home or in your workshop.

Makita 9557PBX1 4-1/2' Paddle Switch Cut-Off/Angle Grinder
2,845 Reviews
Makita 9557PBX1 4-1/2" Paddle Switch Cut-Off/Angle Grinder
  • Powerful 7.5 AMP motor for high output power in a more compact tool (only 4.5 pounds)
  • Small diameter barrel grip (only 2 to 1/2 inches) for added comfort
  • Labyrinth construction seals and protects the motor and bearings from dust and debris for longer tool...
  • Lock on/off feature for continuous operation
  • AC/DC switch for use with alternative power source

This tool can be used for sanding, polishing and cutting, so it can be considered as multifunctional. It has a 900W motor and is capable of reaching 12,000 RPM, providing efficient performance on various types of materials.

Regarding its handling, it is compact in size to increase its ergonomics and offers protection accessories that will form a lock between your hands and the blades of the grinder.

In addition to this, it should be noted that the casing of the equipment is designed to increase the quality of ventilation, so as to avoid overheating of the components and the accumulation of dust in the internal corners of the grinder.

Next, we invite you to know some of the relevant aspects regarding the angle grinder offered by the Tacklife brand, to determine if it is worth purchasing:

Pros

Discs: With the purchase of this model you will get a pair of interchangeable discs that you can use with your angle grinder when you need to replace the current one.

Cover: The presence of a protective cover will minimize the risk of accidents when using the tool.

Ventilation: It offers a design focused on ventilation, to avoid the accumulation of dust and wood debris, helping to extend the useful life of the equipment.

Bag: A spacious carry bag is included, where you can store or carry the equipment, in case you need it.

Cons

3. Makita XAG04Z 18V LXT Lithium

Applications: The design and capacity of this grinder make it suitable mainly for simple jobs, since it does not have the necessary power, for application in professional uses.

Makita XAG04Z 18V LXT Lithium-Ion Brushless Cordless 4-1/2” / 5" Cut-Off/Angle Grinder, Tool Only
  • Automatic Speed Change technology adjusts speed and torque during operation for optimum performance
  • Active Feedback-sensing Technology (AFT) turns the motor off if rotation of the wheel is suddenly forced...
  • The BL Brushless Motor eliminates carbon brushes, enabling the BL Motor to run cooler and more...
  • Efficient BL Brushless motor is electronically controlled to optimize battery energy use for up to 50%...
  • The electronically-controlled BL Brushless Motor efficiently uses energy to match torque and RPM to the...

We could consider this second product as one of the best angle grinders of 2021. It is the Hitachi G13SR3, which has 730 W of power and a speed of 10,000 rpm.

It has a 12.5 cm diameter disc, retention spindle with M14 thread and gear with head, so you can work in great detail in the corners or narrow spaces of the material. Its slide switch located on one side of the tool allows it to be locked for greater user safety.

The Hitachi G13SR3 weighs just 1.4 kg and has an overall length of 25.4 cm, which makes it one of the most compact and lightweight grinders that also offers a modern design. It has a high-performance motor that has carbon brushes to prolong its useful life.

As if that were not enough, this angle grinder offers accessories, among which are a lateral auxiliary handle, which is interchangeable in two positions with 15 degrees of inclination, and a tool to change the disc.

Excellence is a characteristic that attracts anyone and this product has been classified as the best angle grinder of the moment, due to the characteristics that we will discuss below, and the opinion of customers.

Pros

Power : Its motor offers a powerful maximum power of 950 W, enough to obtain a more than remarkable performance on almost all surfaces, including metal.

Handle : It comes with a side handle to facilitate its handling, as well as a special key to be able to make the necessary adjustments when a change of parts is required.

Weight : One of the most talked about features of this grinder is its weight of only 1.4 kg, which is great for comfortable use and without causing too much fatigue in the user.

Head : The head is flat design to facilitate work in corners and tight spaces, without the need to attach accessories to do so.

Warranty : The brand offers an extendable warranty of up to 3 years, just by registering the product after purchasing it on its website.

See deals of the day on Amazon

4. Makita XAG09Z 18V LXT Lithium

Although it is not in the first place this figure among the best angle grinders of 2022.

The Einhell TE-AG 115 angle grinder is considered by many users as a high quality tool that meets the expectations of experts in repairs such as cutting, sanding and grinding. , not only in homes but in professional workshops.

Makita XAG09Z 18V LXT Lithium-Ion Brushless Cordless 4-1/2"/5" Cut-Off/Angle Grinder
  • Electric brake stops the grinding or cut-off wheel in 2 seconds or less for maximum productivity
  • Active feedback-sensing technology (aft) turns the motor off if rotation of the wheel is suddenly forced...
  • Automatic speed change technology adjusts speed and torque during operation for optimum performance
  • The BL Brushless motor eliminates carbon brushes, enabling the BL motor to run cooler and more...
  • Efficient BL Brushless motor is electronically controlled to optimize battery energy use for up to 50%...

It has a blade guard that can be adapted very easily to any task because it has a quick adjustment mechanism that does not need tools, while the spindle lock allows you to change tools quickly.

The Einhell TE-AG 115 angle grinder is designed to provide a low level of vibration thanks to its flat metal gear head that guarantees optimal transmission of force during operation.

It is also one of the most comfortable thanks to its slim case that makes it light. It also offers a non-slip grip, both on the main handle and on the auxiliary handle.

When the doubt continues to assail you and you still do not know which angle grinder to buy, we invite you to review the advantages and disadvantages that this model offers to see if it fits your needs and budget.

Pros

Power : Offers 720W power that will be great to work with almost all surfaces and materials on which to use this grinder.

Disc protector : This mechanism can be adjusted with just one button and without the need for tools, so it will make maintenance a very simple task.

Head : It incorporates a flat type gear head to ensure a better transmission of motor force, as well as reduce motor vibration.

Characteristics : Unlike the other competitors, it brings with it its respective cutting disc, a dowel wrench that is stored inside the auxiliary handle, the latter with the possibility of adjusting in three different positions.

Cons

Case : Several users claim that the lack of a factory case to store it is its biggest disadvantage.

See deals of the day on Amazon

5. Makita 9557PB 4-1/2″ Paddle Switch Angle Grinder

We couldn’t fail to mention a great mini-size tool, which is among the best cheap grinders on the market today. We refer to the M 1216-EWS model from the German brand Brüder Mannesmann.

Makita 9557PB 4-1/2' Paddle Switch Angle Grinder, with AC/DC Switch
504 Reviews
Makita 9557PB 4-1/2" Paddle Switch Angle Grinder, with AC/DC Switch
  • Powerful 7.5 AMP motor delivers 11,000 RPM for high output power
  • Compact design with small 2-1/2" diameter barrel and weighs only 4.5 lbs. for added comfort
  • Labyrinth construction seals and protects the drive gear and bearings from contamination for longer tool...
  • Lock-on/off feature for continuous operation
  • AC/DC switch for use with alternative power source

This mini angle grinder is designed for occasional work with not very hard materials. It has a 500W power motor and a 115mm diameter blade that is suitable for polishing and polishing metals, as well as sharpening cutting tools or ceramic cutting.

It is capable of cutting up to 11.5mm thick. It is necessary to clarify that it is not a grinder to use in workshops for hours, it has a low power motor so it is advisable to use it intermittently for short periods of time otherwise it can overheat thus reducing its useful life.

The Brüder Mannesmann M 1216-EWS has an additional handle that can be screwed on to the right or left of the tool according to the user’s taste and needs. It also has an adjustable guard on the disc that protects from the usual sparks. It also has a proper spindle lock and safety slide switch for accessory changes.

If you are looking for an option that is highly affordable and performs well, Brüder’s tool stands out among the cheapest. Learn about its characteristics below to see if you decide on it.

Pros

Power : It has a maximum power of 500 W, which ensures good performance in a variety of materials.

Guard : The blade guard is adjustable in various positions, to prevent chips from jumping violently directly at the user.

Handle : It has a handle on one side that allows the user a more comfortable and safe handling of the tool and that can be removed if desired.

Price : Users praise that price is one of the key attractions of this product, as it is extremely accessible for a tool of its kind.

Cons

Overheating : Customers say that while using the machine, it overheats on some occasions, making it uncomfortable to use.

See deals of the day on Amazon

DEWALT FLEXVOLT ADVANTAGE 20V MAX Angle Grinder

This is considered by many users as the best angle grinder of 2021, not only because of its brand, which already speaks of the quality of the product, but also offers everything that only other more expensive grinders can offer.

DEWALT FLEXVOLT ADVANTAGE 20V MAX Angle Grinder, Paddle Switch, 4-1/2-Inch to 5-Inch, Tool Only (DCG416B)
731 Reviews
DEWALT FLEXVOLT ADVANTAGE 20V MAX Angle Grinder, Paddle Switch, 4-1/2-Inch to 5-Inch, Tool Only (DCG416B)
  • Angle grinder gets up to 54% more power when paired with FLEXVOLT batteries
  • Kickback Brake of DEWALT angle grinder engages with maximum force to quickly stop the wheel and shut off...
  • E-CLUTCH shuts down the motor of DEWALT angle grinder in under a tenth of a second when a pinch/stall is...
  • Compatible with all DEWALT 20V MAX* and FLEXVOLT Batteries
  • E-Switch Protection requires the trigger switch to be cycled (turned off and on) in the event of a power...

The Bosch GWS 7-125 is a professional angle grinder with a nominal power of 720 W, and an idle speed of 11000 rpm, so it performs well on any material.

The diameter of the disc is 125 mm and it has a lightweight 115 mm diameter rubber plate. In addition, it weighs less than 2 kilograms, so it is quite portable and you can work with it for long periods without getting too tired.

Its casing is made of aluminum, very resistant to impacts and scratches, which guarantees the long useful life of this product. Likewise, it has self-disconnecting carbons and specially designed ventilation inlets that allow optimal cooling that finally protects the engine.

The Bosch GWS 7-125 Professional grinder provides a high degree of user protection. Features a protective cover with twist lock.

When looking for a good price-performance ratio, we would like to recommend the best angle grinder for 50 euros on the market. Read the benefits it offers below.

Pros

Power : It offers a nominal power of 720 W, enough to work even with metals without any problem. Also, it has an idle speed of 11,000 rpm.

Safety : It incorporates self-disconnecting carbons that will stop the engine immediately after releasing the trigger for greater safety.

Easy change : It has a special button that allows you to unlock the blade in a single step, without the need for tools and that will be much more comfortable.

Durability : It is made with a highly durable aluminum casing to withstand the corresponding use, as well as offering lightness.

Weight : At just 1.9 kg, it is one of the lightest grinders on the market, and it allows for fantastic maneuverability.

See deals of the day on Amazon

How to use an angle grinder

Whether in a specialized workshop or at home, a single tool can perform endless jobs if used properly. Within the market there are numerous tools that stand out for their versatility and practicality such as angle grinders with which you can cut, sand, clean, sharpen and do many other jobs.

What accessories can you use

The versatility that characterizes angle grinders is due to the fact that you can adapt a good number of accessories that allow you to carry out different tasks with the same tool, just by exchanging the discs according to your needs.

The discs that you can put on it are the cutting discs that you can use to section plates, beams and any other similar material. With diamond grinding wheels you can refine materials such as concrete and stone. The abrasive and sandpaper discs will help you remove residues adhering to them from the surfaces. With the sheet ones you can do a similar job, since they sand and smooth surfaces easily and with the polishing discs you can polish them. There is a disk for each specific task that you are going to perform.

Cut or grind

To perform cutting or grinding work you should start with using the appropriate disc for it in the angle grinder. In this case it would be the cutting disc. Next, you must make sure that the material you are going to section is stable, that it does not move.

Ideally, for this type of work, you should use a workbench to help you firmly hold what you are going to cut. Turn on the grinder making sure to hold it firmly. Bring it closer to what you are going to cut. Brush the disc over the surface and press gently as you cut.

Sharpen the blades

When the blades you use in your home lose their edge, their practicality goes with it. With an angle grinder you can easily sharpen it back. To do this, put the blade in a vise or clamping system that will keep it very secure. Put in the sharpening disc and turn on the machine. Then carefully pass the disc by gently brushing the edge of the blade at an angle between 25 and 35 degrees.

Use it safely

An angle grinder is a powerful machine whose motor rotates at high revolutions per second, which is capable of causing damage; especially when you have some kind of disk mounted. That is why it is very important that you use it following all the security measures corresponding to the case.

In principle, preferably, when you are using it there should be no one else nearby, unless you require the help of another person. In that case you both need to be careful when the grinder is turned on. You should also use some safety implements such as glasses to prevent metal residues from entering your eyes, face masks, gloves and safety boots. The clothes you work with should not be baggy. When you are not using the grinder, unplug it from the electrical outlet and put the protector on the blades.

The most popular brands

When you are in the world of construction or working in some type of industrial area, it is essential to have an angle grinder on hand, since they serve so that the delivery of each project has an unparalleled finish. Few companies make this type of durable and quality instruments, so users have certified three companies that meet the requirements they have demanded, and which are described below.

Its operations have been active for more than 50 years in more than 40 countries, providing solutions to traders and artisans to work in all types of environments: either at home or at work. Many tasks have been carried out thanks to this brand, with stationary machines and power tools with great power.

Its main headquarters are in Germany, specifically in Landau an der Isar. Today it brings together a total of 1,320 workers worldwide and its earnings are close to 486 million euros per year. All users are impressed with the innovative product collections that are very good value for money, giving renown to their motto “Einhell well done”.

His vision in the development of products is based on the gift of transforming faster and with more flexibility and innovation than the competition, satisfying the needs of each consumer through specialized stores, recognized worldwide. Thus, the user can contact a technician to help him find the item he needs, request the repair of an instrument that has suffered mishaps or activate the warranty in case of factory defects, because Einhell provides an exclusive customer service, paying attention to cases in a personalized way.

It was founded in 1915 as a company that was only in charge of repairing and selling electric motors. It is currently a very popular brand in more than 40 countries, with 10 plants operating in 8 countries, working in the manufacturing area with the best raw material in its class.

Its manufacture has been controlled by various international standards, its quality, durability and the development of each process being investigated, resulting in being evaluated as a trusted brand for professional or inexperienced people. The instruments they manufacture are compact, low-vibration and more manageable in the hands of their drivers.

Its central office is in California, in the United States, from where extensive chains of operations are handled throughout the American territory. In Buford, Georgia, there are 10 manufacturing and assembly plants, the source of the Makita items that make up its extensive global network. Each human team is made up of professionals and workers ranging from engineers to contractors, who guarantee the development of the most advanced technologies and applications on demand.

The first Precision Mechanics and Electrical Engineering Workshop was opened by Robert Bosch in 1886. What started as a simple tool repair business has grown into one of the oldest multinational companies in history, but also one of the bigger.

Its primary goal is to provide a service to those who need it by improving their quality of life, focusing on the manufacture of industrial and automotive technical equipment. Each patent is built thinking about the protection of the environment and making a responsible and respectful use of all raw materials that nature provides. In this way, they offer appliances with a high level of energy efficiency and with more financial savings for each client.

Its progress has been so great that it is currently united with other brands that encompass areas other than industrial ones to help people in their daily work. In the case of grinders, these are characterized by having a high power level, resistant manufacturing materials and ease of use, managing to offer a competitive product due to its manufacturing quality.

Frequently asked questions

Q1: How to cut wood with an angle grinder?

Cutting wood with a grinder is not an easy process. However, if you want to do it, the right thing to do is wear protective eyewear and a safety mask. There are even those who suggest the use of gloves.

Caution must be exercised in each of the cuts and it is verified that the wood does not have pieces of material inserted, so that the grinder disc does not collide with them or the equipment jams.

Therefore, after using the clothing, the next thing is to adjust the cutting wheel and activate the protection of this in the grinder. When the good condition of the wood has been verified, the grinder should be turned on and the cut that is needed carefully made.

When it is finished, it will have to be turned off and wait a little and then remove the disc. If it is a model with a power cable, then it will be necessary to disconnect it for the user’s safety.

Q2: How to use the angle grinder for sanding?

A grinder is a piece of equipment that can be sanded, but it is necessary to adapt an accessory that is usually a rubber base and, in turn, it should be used with a special sandpaper, in order to have a firm base that prevents that breaks as a result of revolutions. These sandpaper have different textures for professional finishes.

To begin, the piece must be fixed with presses and the grinder must be passed with both hands and the necessary protection, because the action will generate a dust that can end up in the eyes and mouth.

During the passes, there is no need to generate pressure, just hold the grinder safely with both hands on the piece and support it gently, since it will be the disc that will be in charge of polishing.

Q3: How to cut ceramic with an angle grinder?

With grinders, the cuts are usually clean and professional, as they are tools that serve to divide various materials. However, it all depends on the disc that is used. The most recommended in the case of ceramics is to use a double diamond disc. The technique is the same as for wood cuts, as are the safety recommendations. The ceramic or porcelain tile should be on a stable surface and the grinder should be passed in the desired direction for cutting.

Q4: How do you take apart an angle grinder?

Disassembling the mechanical parts of the grinder can be a complex task that could even damage the work equipment, so it is recommended to leave this to the professionals.

However, the head can be disassembled to fit new discs. For this, it is only necessary that the device is disconnected and release the disc lock, and then carefully remove the disc from the holder.

Q5: How to make an angle grinder stand?

Cutting freehand with the angle grinder can lead to the final product not being perfect and not matching the rest of the pieces, so it is convenient to have a support. These pieces can be purchased, but can also be made independently, if you have knowledge in blacksmithing.

This is because it will be necessary to make a metal structure that will support the weight of the angle grinder, so it is necessary to take the measurements of the device, create a sketch and weld the parts until you get a base on which you can rest the equipment, and then place it on a rail on the work table.

Leave a Comment