If you are planning to purchase a band saw or you are already working with one, but you want to have a clearer idea about how to handle it safely, respecting all regulations, in this space you will be able to find out which ones are ruled by experts to be able to use the tool while minimizing the risk of accidents.
Before you can use a band saw correctly, you must first know what it is and what its most important parts are, so that you can handle it without problems avoiding touching dangerous areas.
A band saw is a tool used in construction, since, depending on its capacity, it can be able to cut wood, plastic, metal and other materials. Its usefulness is quite wide thanks to the fact that it allows you to modify large pieces to adopt particular shapes and even curve corners and round structures.
This machine uses a metal band with teeth similar to a saw, but is thin in comparison and much longer. One of its most notable qualities is that this metal band is capable of turning very quickly, due to the fact that it is integrated into a mechanism of two parallel wheels powered by a motor.
On the other hand, band saws also need clamping elements to keep the piece firm when cutting. In this case, you will find presses and guides that will help you make a precise cut, so that everything fits in place when assembled.
In addition, there are large capacity models that, due to the type of materials with which it works, can have hydraulic pumps to add liquid lubrication during the cutting process, which can also act as a coolant to avoid overheating of the belt and the piece.
You should know that when using a bandsaw there are latent risks to your integrity. One of them is the possible breakage of the cutting band due to excessive tension, overheating, wear or poor quality in the welds.
Care must also be taken with the electrical connections of the equipment. Make sure that it is not being overloaded due to the motor power, as well as respect the installation of the ground wire to avoid electric shock.
In addition to this, another common risk when using a bandsaw is particles that can be thrown from the piece you are cutting. This is dangerous because they can get into your eyes and cause damage to the cornea, either due to its sharp edges or its speed. For this reason, it is best to use the right equipment to protect your eyes on each occasion of use.
Safe use of the band saw
When using the best bandsaw to cut parts of any type, several safety regulations must be followed to avoid injury or accident due to the capacity of some models, especially if you need to work with small or loaded parts. of details. If you are interested in knowing the basic regulations to safely use a band saw, we invite you to read the following list:
1. Protection of the band saw
One of the first aspects to take care of in a band saw is to keep the cutting band covered and only leave the area to be used exposed in order to minimize the risk of accidental cuts. Also, when the equipment is not in use, it is advisable to install a band cover.
Another recommendation regarding the saw itself is to have a good lighting system available in case that built into the equipment is not enough. This will help you to have better control of your movements and those of the piece.
2. Equipment necessary for protection
Since a band saw is often used manually, some safety features must be in place to protect the integrity of the user.
A pair of mechanical protective gloves will be enough to keep your hands safe from accidental touch with the moving band. You will also need safety glasses that are transparent so as not to block your vision while using the saw.
On the other hand, the use of safety footwear is recommended to keep the feet safe from any piece or material that may fall, as well as ear plugs due to the sound produced by the motor that is considerably loud.
And if you are going to cut pieces that give off particles, you can use a mask with a filtration system that will block the passage of these towards your body.
3. Regulations for safe use
To properly set up your bandsaw, you will first need to check the tension of the cutting band and turn on the equipment to make sure the band is moving in the proper direction. Afterwards, it is advisable to verify that the cutting piece does not exceed the recommended size nor is it made of a material that is not compatible with the machine.
When you are sure of these parameters, turn off the saw to be able to accommodate the piece between the clamping presses respecting the guides and fasteners. Some users advise never to manipulate the piece with your hands, no matter how small.
4. Regular maintenance
Finally, in order to have a safe-to-use bandsaw, you will need to perform regular maintenance sessions to ensure smooth, trouble-free performance.
If you use the saw daily, it is advisable to vacuum and brush all the chips and debris that may have remained after using the equipment, including the nooks and crannies to avoid accumulation. The same applies to the work area around the machine.
In addition to this, it is recommended to check the wear level of the cutting band in case it needs to be replaced, as well as to check the amount of coolant or lubricant that has been used in case you need to fill the band saw tank again. .